+- PINE64 (https://forum.pine64.org)
+-- Forum: PineCube (https://forum.pine64.org/forumdisplay.php?fid=149)
+--- Forum: General Discussion on PineCube (https://forum.pine64.org/forumdisplay.php?fid=150)
+--- Thread: Ribbon cable routing (/showthread.php?tid=11952)
Ribbon cable routing - monty1 - 10-26-2020
Got my camera, unboxed it, noticed one issue right away, the sensor(?) ribbon cable was not connected, which is easy enough to re-plug. I'm guessing that manipulations of the wifi antenna (brown piece in the middle of first pic) made it come loose. It's a rotate-to-close connector on the rear board, with the cable positioned in a way that any significant pressure would be towards the open position.
Will give it a whirl tonight to see how things work.