+- PINE64 (https://forum.pine64.org)
+-- Forum: PineTab (https://forum.pine64.org/forumdisplay.php?fid=140)
+--- Forum: PineTab Software (https://forum.pine64.org/forumdisplay.php?fid=142)
+--- Thread: Any way to disable wake on power connect/full charge? (Arch) (/showthread.php?tid=11822)
Any way to disable wake on power connect/full charge? (Arch) - quipacorn - 10-13-2020
Hi all,
I've been using my early adopter PineTab more frequently over the past few weeks and there's a lot to like. There's still a few minor nagging things, like the wake on power connect. Basically I'd like to change the behavior so when I plug in a power adapter or it charges to 100% it doesn't automatically wake from sleep. My hope is this is something that can be handled via software, but I could also see it being something at a deeper firmware level. I'm guessing it's the latter.
What I tried:
1. Power manager options (xfce4-power-manager,tlp,etc.)
2. Changing wake parameters in various locations in /sys/ and similar, no dice. Guessing those I found as likely candidates are read-only state parameters.
3. Looked for possible systemd options
4. Those were my best guesses. I tried searching around but most of what I found were related to WoL or BIOS specifically. There was a post on the gentoo forum but that referenced /proc/acpi which is not present.
For reference I'm running Arch + i3.
Thanks in advance!
RE: Any way to disable wake on power connect/full charge? (Arch) - barray - 10-14-2020
Dammit! This is what happened to me! I charged it when it was off because it was low-ish, threw it in my bag after and when I came back to it, the device was completely dead. It must have switched on when the power was applied - very weird behaviour! I would definitely disable this if I could...
RE: Any way to disable wake on power connect/full charge? (Arch) - fsflover - 10-14-2020
This is a hardware feature and cannot be changed it seems: https://forum.pine64.org/showthread.php?tid=10681.
RE: Any way to disable wake on power connect/full charge? (Arch) - quipacorn - 10-14-2020
(10-14-2020, 02:31 AM)barray Wrote: Dammit! This is what happened to me! I charged it when it was off because it was low-ish, threw it in my bag after and when I came back to it, the device was completely dead. It must have switched on when the power was applied - very weird behaviour! I would definitely disable this if I could...
Yeah, it can be annoying.
(10-14-2020, 03:10 AM)fsflover Wrote: This is a hardware feature and cannot be changed it seems: https://forum.pine64.org/showthread.php?tid=10681.
Darn, I figured that would be the case.
Just had a thought, I wonder if there's a way to trap the wake event and have it suspend right after since it's not from a full power-off state.