+- PINE64 (https://forum.pine64.org)
+-- Forum: PINE A64(+) (https://forum.pine64.org/forumdisplay.php?fid=4)
+--- Forum: Pine A64 Hardware, Accessories and POT (https://forum.pine64.org/forumdisplay.php?fid=32)
+---- Forum: Enclosures (https://forum.pine64.org/forumdisplay.php?fid=14)
+---- Thread: Acrylic enclosure (/showthread.php?tid=1135)
Acrylic enclosure - mFinnholm - 05-24-2016
Would anyone that has received their Acrylic case be so kind and provide some measurements for it?
I´m most interested in hole layout as I´m going to mount it using the original holes from the enclosure.
It would be nice to get some work done before my shipment arrives
RE: Acrylic enclosure - benpope81 - 05-24-2016
Which holes? The posts between top and bottom or the holes for mounting the Pine64?
Posts are 151.5mm and 102mm between centres. Actually, I measured the current position of the posts, not the holes, as it's assembled, but I don't think there's much wiggle room, all equivalent sides match.
RE: Acrylic enclosure - Ghost - 05-24-2016
(05-24-2016, 09:05 AM)benpope81 Wrote: Which holes? The posts between top and bottom or the holes for mounting the Pine64?
Posts are 151.5mm and 102mm between centres. Actually, I measured the current position of the posts, not the holes, as it's assembled, but I don't think there's much wiggle room, all equivalent sides match.
I think they mean the length, width and depth of the actual acrylic case, not the distance between holes/posts.
RE: Acrylic enclosure - benpope81 - 05-24-2016
(05-24-2016, 09:36 AM)Ghost Wrote:(05-24-2016, 09:05 AM)benpope81 Wrote: Which holes? The posts between top and bottom or the holes for mounting the Pine64?
Posts are 151.5mm and 102mm between centres. Actually, I measured the current position of the posts, not the holes, as it's assembled, but I don't think there's much wiggle room, all equivalent sides match.
I think he means the length, width and depth of the actual acrylic case, not the distance between holes/posts.
Acrylic dimensions: 167x118mm
Acrylic case height (external face to external face): 48mm
Height including posts: 57mm
RE: Acrylic enclosure - mFinnholm - 05-24-2016
(05-24-2016, 09:43 AM)benpope81 Wrote:(05-24-2016, 09:36 AM)Ghost Wrote:(05-24-2016, 09:05 AM)benpope81 Wrote: Which holes? The posts between top and bottom or the holes for mounting the Pine64?
Posts are 151.5mm and 102mm between centres. Actually, I measured the current position of the posts, not the holes, as it's assembled, but I don't think there's much wiggle room, all equivalent sides match.
I think he means the length, width and depth of the actual acrylic case, not the distance between holes/posts.
Acrylic dimensions: 167x118mm
Acrylic case height (external face to external face): 48mm
Height including posts: 57mm
Sorry about being unclear, I meant between the posts, as I will mount the entire case on to a bigger sheet of acrylic, and it would be easiest to use existing holes for that