+- PINE64 (https://forum.pine64.org)
+-- Forum: PINE A64-LTS / SOPINE Compute Module (https://forum.pine64.org/forumdisplay.php?fid=66)
+--- Forum: Linux on PINE A64-LTS / SOPINE (https://forum.pine64.org/forumdisplay.php?fid=69)
+--- Thread: No HDMI output on standard Debian install / no boot (/showthread.php?tid=11219)
No HDMI output on standard Debian install / no boot - sagada - 09-01-2020
Good morning
First of all sorry if this has been answered but all my searches on the forum related to the rock64 or pinebook, found noting for the A64-LTS
Recently i've got a Pine A64-LTS board and tried to perform a standard Debian install following the instructions on the wiki: https://wiki.debian.org/InstallingDebianOn/PINE64/PINEA64
I've tried now with all the .dtb files for pine devices, sun50i-a64-pine64-lts.dtb, sun50i-a64-sopine-baseboard.dtb ... the board still looks dead, no HDMI output.
Any clue can I be doing wrong?. A64-LTS does work with standard Debian right?
I've succesfully booted the board with armbian, so it isn't dead, but really need to perform a Debian standard install...
Thanks in advance for the answers and sorry for the "engrish"
RE: No HDMI output on standard Debian install / no boot - sagada - 09-02-2020
Until I find how to perform myself an install I found this web that provides funtional images to boot a standard Buster system:
https://sd-card-images.johang.se/boards/pine64_lts.html
Hope this helps anyone who has the same problem.
RE: No HDMI output on standard Debian install / no boot - kuleszdl - 09-06-2020
Debian does not provide u-boot firmware for the A64-LTS, it only does for the A64(+). The easiest way to get it working is to compile your own u-boot and use that instead. However, you can't use the packaged u-boot then.