How to update U-Boot for PostmarketOS on the PinePhone and much more! - Printable Version +- PINE64 (https://forum.pine64.org) +-- Forum: PinePhone (https://forum.pine64.org/forumdisplay.php?fid=120) +--- Forum: PinePhone Software (https://forum.pine64.org/forumdisplay.php?fid=121) +---- Forum: PostmarketOS on PinePhone (https://forum.pine64.org/forumdisplay.php?fid=124) +---- Thread: How to update U-Boot for PostmarketOS on the PinePhone and much more! (/showthread.php?tid=11099) |
How to update U-Boot for PostmarketOS on the PinePhone and much more! - dustfinger - 08-20-2020 Hi, I just posted an article on how to update U-Boot for PostmarketOS on the PinePhone. From the introduction of the article: Quote:In this article, I am going to explain what U-Boot, SoC and the SPL are. After that, I will describe the sunxi bootable storage layout as well as the PinePhone boot procedure, so you will understand what you will be updating and why. Then, I will teach you how to determine if an upgrade is required, and I will explain two different ways of upgrading U-Boot. As a special treat for the curious, I will show you the first steps to reverse engineer the U-Boot+SPL firmware blob. I hope this article peeks your curiosity and encourages you to learn more. Cheers! Trevor How to update U-Boot for PostmarketOS on the PinePhone and much more! - eKeith - 08-20-2020 Thank you! This is superbly written and will encourage me to learn... Sent from my PH-1 using Tapatalk RE: How to update U-Boot for PostmarketOS on the PinePhone and much more! - bingo600 - 08-21-2020 Outstanding explanation of U-Boot functionality on the PP Thank you /Bingo |