+- PINE64 (https://forum.pine64.org)
+-- Forum: ROCKPRO64 (https://forum.pine64.org/forumdisplay.php?fid=98)
+--- Forum: Linux on RockPro64 (https://forum.pine64.org/forumdisplay.php?fid=101)
+--- Thread: Problems with my RockPro64 (/showthread.php?tid=11083)
Problems with my RockPro64 - tuxd3v - 08-19-2020
Hello guys,
I noticed yesterday night, that my RockPRo64 was not running..
I discovered that the board was very high temperature around the red ellipse in the picture bellow..
https://paste.pics/7e66971884c4b53ee63160a9dc4c9995
it extended till the lcd header connectors close to the ellipse, it was so high that I made a burn in my finger..
I disconnected the power supply from the board..
I already checked power supply voltage seems ok, but again without load( 12.3volts )..
Those components were heating up maybe because there are a short circuit somewhere in the board.. after that ellipse maybe..
I wanted to know what reference those component's are in the Datasheet diagram, so that I can look at them and see what I can do.
Can Anyone help me?
Thanks a lot in advance,
Best Regards
tux