PINE64
Restoring img file to eMMC - Printable Version

+- PINE64 (https://forum.pine64.org)
+-- Forum: Pinebook Pro (https://forum.pine64.org/forumdisplay.php?fid=111)
+--- Forum: Linux on Pinebook Pro (https://forum.pine64.org/forumdisplay.php?fid=114)
+--- Thread: Restoring img file to eMMC (/showthread.php?tid=10992)



Restoring img file to eMMC - GloriousCoffee - 08-08-2020

Hi

I ran update/upgrade on my debian installation on eMMC yesterday which resulted in the system not booting anymore.
I have a backup image file of the eMMC which I did with gnome-disks but after booting a system from USB and trying to restore the image to eMMC the process is stuck on 0.0%. First I thought it might be calculating something, so I left the computer on all night, but when I woke up it was still at 0.0%. Is there perhaps some other way to restore the image to eMMC ? I don't have the USB->eMMC adapter unfortunately, otherwise I would have tried it to. Installing LUKS debian was a bit of a hassle, so inputs are appreciated if I can get it up and running again without having to go through the whole installation again.


RE: Restoring img file to eMMC - tophneal - 08-08-2020

try using dd in terminal instead of something like Gnome Disks.


RE: Restoring img file to eMMC - GloriousCoffee - 08-08-2020

I'm trying with dd now. Doing: dd if=/pathtoimg of=/dev/mmcblk1

I can see in 'top' that dd is running, but the program isn't outputing anything. Similar to how gnome-disks did (could also see it running with load in top).

Never used dd before, is it normal for it to not have any output during operation ?


RE: Restoring img file to eMMC - GloriousCoffee - 08-08-2020

Nvm my question, I aborted it and saw 40gb copied so I guess its working quietly.


RE: Restoring img file to eMMC - reptar - 08-08-2020

add status=progress in your dd command next time so you can get some feedback. Without status=, there is no feedback(unless you issue a -USR1 systemcall in another terminal)
dd if=/pathtoimg of=/dev/mmcblk1 status=progress


RE: Restoring img file to eMMC - GloriousCoffee - 08-08-2020

Thanks ya'all

Restoring with dd worked like a charm.