+- PINE64 (https://forum.pine64.org)
+-- Forum: PinePhone (https://forum.pine64.org/forumdisplay.php?fid=120)
+--- Forum: PinePhone Accessories (https://forum.pine64.org/forumdisplay.php?fid=123)
+--- Thread: PinePhone CAD Models for Design Improvements (/showthread.php?tid=10955)
PinePhone CAD Models for Design Improvements - jdmark - 08-04-2020
Does anyone have a link to the PinePhone CAD models? I might have a design improvement or two that I would like to implement using CAD and either make a custom part or contribute them directly to the Pine64 PinePhone project. If someone would care to share them I would appreciate it, thank you.
RE: PinePhone CAD Models for Design Improvements - tophneal - 08-05-2020
There are CAD files on the wiki, have you checked those, yet?
RE: PinePhone CAD Models for Design Improvements - bridadan - 08-05-2020
I was only able to find the back cover CAD file (bottom link in the section): https://wiki.pine64.org/PinePhone#Datasheets_for_Components_and_Peripherals
I found the exploded view here: http://files.pine64.org/doc/datasheet/pinephone/PinePhone%20Exploded%20Diagram%20ver%201.0.pdf
I'd especially be interested in a CAD file for component #9, the "Bottom-case". This would make designing attachable peripherals for the pogo pins much easier!
RE: PinePhone CAD Models for Design Improvements - jdmark - 08-17-2020
The part and respective CAD file that I need is labeled "Bottom-case" in the PinePhone diagram which is the actual frame of the phone itself. I'd like to implement a design improvement in the frame to vastly increase it's durability.
I was hoping one of the developers such as Luke would share the CAD file with me either in this thread or privately so I don't have to order the part from China? It would save me time drawing it in FreeCAD, I won't have to wait 2-4 weeks for it to arrive, and I would only have to make modifications and testing.
RE: PinePhone CAD Models for Design Improvements - deedend - 09-07-2020
(08-06-2020, 10:26 AM)jamie22 Wrote:(08-05-2020, 10:24 AM)bridadan Wrote: I was only able to find the back cover CAD file (bottom link in the section): https://wiki.pine64.org/PinePhone#Datasheets_for_Components_and_Peripherals
I found the exploded view do my assignment australia here: http://files.pine64.org/doc/datasheet/pinephone/PinePhone%20Exploded%20Diagram%20ver%201.0.pdf
I'd especially be interested in a CAD file for component #9, the "Bottom-case". This would make designing attachable peripherals for the pogo pins much easier!
I will check out these files now. Thanks for the links.
What is this URL that appeared in the quote? I can't find it in the original post, so weird
Annotation 2020-09-08 114455.png (Size: 93 KB / Downloads: 424)