Graphics issue on ubuntu bionic

Graphics issue on ubuntu bionic - Printable Version

+- PINE64 (https://forum.pine64.org)
+-- Forum: Pinebook Pro (https://forum.pine64.org/forumdisplay.php?fid=111)
+--- Forum: General Discussion on Pinebook Pro (https://forum.pine64.org/forumdisplay.php?fid=112)
+--- Thread: Graphics issue on ubuntu bionic (/showthread.php?tid=10941)

Graphics issue on ubuntu bionic - das - 08-03-2020

I received my pbp a few weeks back and was generally happy to get it.
It arrived with Manjaro ARM plasma, but due to missing 32-bit support and therefore inability to use widevine, I decided to flash ayufan-rock64 bionic-mate 0.9.16-1163-armhf image to the eMMC module.

I did so using the usb-to-eMMC adapter and

Code:
dd if=bionic-mate-pinebookpro-0.9.16-1163-armhf.img of=/dev/sdc

Afterwards the graphics was glitched, shown on the picture. Which I thought was due to a loose connection. But after flashing the Manjaro ARM image using the same dd command, the graphics was fine.

[Image: RrdQZwh.jpg]

Any ideas to as to why this would happen?