+- PINE64 (https://forum.pine64.org)
+-- Forum: PINE A64(+) (https://forum.pine64.org/forumdisplay.php?fid=4)
+--- Forum: Pine A64 Hardware, Accessories and POT (https://forum.pine64.org/forumdisplay.php?fid=32)
+---- Forum: POT modules (https://forum.pine64.org/forumdisplay.php?fid=8)
+---- Thread: Pine64 Eagle LBR (/showthread.php?tid=1081)
Pine64 Eagle LBR - openhardwarecoza - 05-18-2016
Hi All
I started working on an Cadsoft Eagle LBR so I can develop a few POTs: (like started 10 mins ago)
I couldnt find a mechanical drawing of the Pine64, so this is all verniered out... / eyed out ....
WIP... Will update here as I make progress - any help appreciated
https://github.com/openhardwarecoza/eagle-library/blob/master/Pine64-hat.lbr
RE: Pine64 Eagle LBR - Luke - 05-18-2016
(05-18-2016, 03:58 AM)openhardwarecoza Wrote: Hi All
I started working on an Cadsoft Eagle LBR so I can develop a few POTs: (like started 10 mins ago)
I couldnt find a mechanical drawing of the Pine64, so this is all verniered out... / eyed out ....
WIP... Will update here as I make progress - any help appreciated
https://github.com/openhardwarecoza/eagle-library/blob/master/Pine64-hat.lbr
good initiative
RE: Pine64 Eagle LBR - adamw - 05-23-2016
Nice work!
I don't have any calipers, so the boards I built are only hanging on by the PI 2 connector.
Any chance you could add dimensions to your drawing?
I'm sure I'm going to do more boards in the future, and I'd be great if they actually fit better.
RE: Pine64 Eagle LBR - xalius - 08-01-2016
Thanks I must have totally missed this, I'm going to check and measure and they maybe just mill one out for fitting tests...