+- PINE64 (https://forum.pine64.org)
+-- Forum: Pinebook Pro (https://forum.pine64.org/forumdisplay.php?fid=111)
+--- Forum: Pinebook Pro Hardware and Accessories (https://forum.pine64.org/forumdisplay.php?fid=116)
+--- Thread: USB-C charging specifications (/showthread.php?tid=10065)
Pages:
1
2
USB-C charging specifications - zxorg - 06-04-2020
If I buy the PineBook Pro, would like to be able to charge it over USB-C, so I can use the same charger I use to charge my smartphone. So what are the charging specs? Is it compatible with Qualcomm Quick Charge 5V/9V/12V? Is compatible with USB Power Delivery? In case I don’t have direct access to wall charger, would like to be able to use power banks, the same I use for android and iPad without having to charge with a barrel connector.
RE: USB-C charging specifications - tophneal - 06-04-2020
https://wiki.pine64.org/index.php/Pinebook_Pro#Power_Supply
RE: USB-C charging specifications - zxorg - 06-04-2020
There are at least 5 versions of Quick Charge, which one does have the PineBook Pro? Specifically if it only supports 5v or supports further higher discrete values.
RE: USB-C charging specifications - tophneal - 06-04-2020
(06-04-2020, 12:24 PM)zxorg Wrote: There are at least 5 versions of Quick Charge, which one does have the PineBook Pro? Specifically if it only supports 5v or supports further higher discrete values.
I'm sorry, i can't recall the specifics, but if the charger you have can supply 5V/3A you should be fine.
RE: USB-C charging specifications - Arwen - 06-04-2020
@zxorg, I've updated the Wiki to indicate that our Pinebook Pros charge from 5 volt USB-C.
And @tophneal is correct, 3 amps would be best. Some of my older USB Type A chargers only do 2.4 amps, so I keep that in mind if I ever have to use one of them.
RE: USB-C charging specifications - zxorg - 06-06-2020
@Arwen thanks for the Wiki update. Actually yes, 3A is quite high amperage for 5V, because high amperage generate lots of heat. Voltage drops along a lengthy cable can be more than noticeable, for example going from 5.3v to 4.6v if the cable is 1.5~3m and the copper section is not high. That's why laptops with PD only allow as a general rule 20v@3A, to reach maximum specs of 100W@20v@5A you need certified cables so there isn't any USB disconnect or self-ignition fire hazard. And GaN chargers are preferred due to more compact size.
For next PineBook Phone/laptop generations I strongly recommend accepting higher voltages in return for less amps.
RE: USB-C charging specifications - mlentink - 07-05-2020
So, for the understanding of a non-technical guy, this would mean that using the USB-C power adapter of my Chromebook (nominally 45W) would not blow up my PBP?
RE: USB-C charging specifications - jiyong - 07-05-2020
(07-05-2020, 08:38 AM)mlentink Wrote: So, for the understanding of a non-technical guy, this would mean that using the USB-C power adapter of my Chromebook (nominally 45W) would not blow up my PBP?
I have used a 65W GaN charger without any problem with the PBP.
Under normal circumstances they do a "handshake".
Otherwise you could already have problems with voltages like 9V, 12V, 15V and even 20V.
Most compatibility issues I have heard involve Apple devices and chargers.
But it still shouldn't blow up the PBP, it just won't charge.
RE: USB-C charging specifications - mlentink - 07-09-2020
(07-05-2020, 10:06 AM)jiyong Wrote:OK. I'll risk it. On your head it is....(07-05-2020, 08:38 AM)mlentink Wrote: So, for the understanding of a non-technical guy, this would mean that using the USB-C power adapter of my Chromebook (nominally 45W) would not blow up my PBP?
I have used a 65W GaN charger without any problem with the PBP.
Under normal circumstances they do a "handshake".
Otherwise you could already have problems with voltages like 9V, 12V, 15V and even 20V.
Most compatibility issues I have heard involve Apple devices and chargers.
But it still shouldn't blow up the PBP, it just won't charge.
;-)
RE: USB-C charging specifications - jiyong - 07-10-2020
Let us know if I can keep my head. ;-)