PINE64
Remote access to Mate desktop using VNC - Printable Version

+- PINE64 (https://forum.pine64.org)
+-- Forum: PINE A64(+) (https://forum.pine64.org/forumdisplay.php?fid=4)
+--- Forum: Linux on Pine A64(+) (https://forum.pine64.org/forumdisplay.php?fid=6)
+---- Forum: Ubuntu (https://forum.pine64.org/forumdisplay.php?fid=27)
+---- Thread: Remote access to Mate desktop using VNC (/showthread.php?tid=1001)



Remote access to Mate desktop using VNC - jl_678 - 05-09-2016

Hi,

So I am trying to do the above and got everything working using X11vnx.  I get all the way to the point that the remote VNC viewer can view the Mate login screen.  This is when the problems occur.  I input the correct credentials and then the VNC session dies.  Below is a link to someone else who had a similar problem.

http://askubuntu.com/questions/288647/vnc-using-lightdm-and-x11vnc-disconnects-immediately-after-valid-login

Now before I go and start trying to monkey with the system as described here (http://superuser.com/questions/524811/how-can-i-run-lightdm-on-xvfb-on-a-raspberry-pi), I want to see if anyone else has seen this and has a simple solution.  My four Raspberry Pis just work with VNC and so I am straying far from my comfort zone and general knowledge on this one.

I would love to know if anyone has addressed this situation successfully, and if so, how they did it.  If not, I will cross my fingers and try out the solution listed above although I am afraid that it might break other things....

Thank you!

JL


RE: Remote access to Mate desktop using VNC - jl_678 - 05-09-2016

Well, I rebuilt the system and now everything works and so it must have something to do with the original install.  All is good now.


RE: Remote access to Mate desktop using VNC - tllim - 05-09-2016

(05-09-2016, 07:35 PM)jl_678 Wrote: Well, I rebuilt the system and now everything works and so it must have something to do with the original install.  All is good now.

Glad to know :-)