+- PINE64 (https://forum.pine64.org)
+-- Forum: Quartz64 (https://forum.pine64.org/forumdisplay.php?fid=166)
+--- Forum: Linux on Quartz64 (https://forum.pine64.org/forumdisplay.php?fid=168)
+--- Thread: slarm64 (unofficial slackware) Quartz64 RK3566 (aarch64) (/showthread.php?tid=14457)
RE: slarm64 (unofficial slackware) Quartz64 RK3566 (aarch64) - dieselnutjob - 12-07-2021
I connected to a big Sony TV.
No output.
Unplugged the HDMI cable and plugged it back in.
I have HDMI !
Booting up before unplugging and replugging:-
Code:
root@quartz64:/var/log# cat Xorg.0.log
[ 43.959]
X.Org X Server 1.20.13
X Protocol Version 11, Revision 0
[ 43.959] Build Operating System: Slackware 15.0 Slackware Linux Project
[ 43.959] Current Operating System: Linux quartz64 5.16.0-rc4 #1 SMP PREEMPT Sun Dec 5 23:15:25 U4
[ 43.959] Kernel command line: root=/dev/mmcblk0p2 ro rootwait rootfstype=ext4 init=/sbin/init lo8
[ 43.959] Build Date: 30 July 2021 08:16:48PM
[ 43.959]
[ 43.959] Current version of pixman: 0.40.0
[ 43.959] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 43.959] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 43.960] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Dec 7 12:35:18 2021
[ 43.964] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 43.964] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 43.972] (==) No Layout section. Using the first Screen section.
[ 43.972] (==) No screen section available. Using defaults.
[ 43.972] (**) |-->Screen "Default Screen Section" (0)
[ 43.972] (**) | |-->Monitor "<default monitor>"
[ 43.974] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 43.974] (**) Option "BlankTime" "0"
[ 43.974] (**) Option "StandbyTime" "0"
[ 43.974] (**) Option "SuspendTime" "0"
[ 43.974] (**) Option "OffTime" "0"
[ 43.974] (==) Automatically adding devices
[ 43.974] (==) Automatically enabling devices
[ 43.974] (==) Automatically adding GPU devices
[ 43.974] (==) Automatically binding GPU devices
[ 43.975] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 43.975] (WW) The directory "/usr/share/fonts/local" does not exist.
[ 43.975] Entry deleted from font path.
[ 43.975] (WW) The directory "/usr/share/fonts/CID" does not exist.
[ 43.975] Entry deleted from font path.
[ 43.986] (==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/TTF,
/usr/share/fonts/OTF,
/usr/share/fonts/Type1,
/usr/share/fonts/75dpi/:unscaled,
/usr/share/fonts/100dpi/:unscaled,
/usr/share/fonts/75dpi,
/usr/share/fonts/100dpi,
/usr/share/fonts/cyrillic
[ 43.986] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 43.986] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 43.986] (II) Loader magic: 0x624c30
[ 43.986] (II) Module ABI versions:
[ 43.986] X.Org ANSI C Emulation: 0.4
[ 43.986] X.Org Video Driver: 24.1
[ 43.986] X.Org XInput driver : 24.1
[ 43.986] X.Org Server Extension : 10.0
[ 43.987] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 43.989] (II) no primary bus or device found
[ 43.989] falling back to /sys/devices/platform/display-subsystem/drm/card0
[ 43.989] (II) LoadModule: "glx"
[ 43.994] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 44.005] (II) Module glx: vendor="X.Org Foundation"
[ 44.005] compiled for 1.20.13, module version = 1.0.0
[ 44.005] ABI class: X.Org Server Extension, version 10.0
[ 44.005] (==) Matched modesetting as autoconfigured driver 0
[ 44.005] (==) Matched fbdev as autoconfigured driver 1
[ 44.005] (==) Assigned the driver to the xf86ConfigLayout
[ 44.005] (II) LoadModule: "modesetting"
[ 44.007] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[ 44.015] (II) Module modesetting: vendor="X.Org Foundation"
[ 44.015] compiled for 1.20.13, module version = 1.20.13
[ 44.015] Module class: X.Org Video Driver
[ 44.016] ABI class: X.Org Video Driver, version 24.1
[ 44.016] (II) LoadModule: "fbdev"
[ 44.016] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so
[ 44.019] (II) Module fbdev: vendor="X.Org Foundation"
[ 44.019] compiled for 1.20.9, module version = 0.5.0
[ 44.019] Module class: X.Org Video Driver
[ 44.019] ABI class: X.Org Video Driver, version 24.1
[ 44.019] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 44.019] (II) FBDEV: driver for framebuffer: fbdev
[ 44.019] (++) using VT number 7
[ 44.024] (II) modeset(0): using drv /dev/dri/card0
[ 44.024] (WW) Falling back to old probe method for fbdev
[ 44.024] (II) Loading sub module "fbdevhw"
[ 44.024] (II) LoadModule: "fbdevhw"
[ 44.027] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so
[ 44.028] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 44.029] compiled for 1.20.13, module version = 0.0.2
[ 44.029] ABI class: X.Org Video Driver, version 24.1
[ 44.029] (EE) open /dev/fb0: No such file or directory
[ 44.029] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 44.030] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 44.030] (==) modeset(0): RGB weight 888
[ 44.030] (==) modeset(0): Default visual is TrueColor
[ 44.030] (II) Loading sub module "glamoregl"
[ 44.030] (II) LoadModule: "glamoregl"
[ 44.031] (II) Loading /usr/lib64/xorg/modules/libglamoregl.so
[ 44.076] (II) Module glamoregl: vendor="X.Org Foundation"
[ 44.076] compiled for 1.20.13, module version = 1.0.1
[ 44.076] ABI class: X.Org ANSI C Emulation, version 0.4
[ 46.636] (II) modeset(0): Refusing to try glamor on llvmpipe
[ 46.643] (EE) modeset(0): glamor initialization failed
[ 46.643] (II) modeset(0): ShadowFB: preferred NO, enabled NO
[ 46.643] (II) modeset(0): Output HDMI-1 has no monitor section
[ 46.644] (II) modeset(0): EDID for output HDMI-1
[ 46.644] (II) modeset(0): Output HDMI-1 disconnected
[ 46.644] (WW) modeset(0): No outputs definitely connected, trying again...
[ 46.644] (II) modeset(0): Output HDMI-1 disconnected
[ 46.644] (WW) modeset(0): Unable to find connected outputs - setting 1024x768 initial framebuffer
[ 46.644] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 46.644] (==) modeset(0): DPI set to (96, 96)
[ 46.644] (II) Loading sub module "fb"
[ 46.644] (II) LoadModule: "fb"
[ 46.645] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 46.651] (II) Module fb: vendor="X.Org Foundation"
[ 46.651] compiled for 1.20.13, module version = 1.0.0
[ 46.651] ABI class: X.Org ANSI C Emulation, version 0.4
[ 46.652] (II) UnloadModule: "fbdev"
[ 46.652] (II) Unloading fbdev
[ 46.652] (II) UnloadSubModule: "fbdevhw"
[ 46.652] (II) Unloading fbdevhw
[ 46.664] (==) modeset(0): Backing store enabled
[ 46.664] (==) modeset(0): Silken mouse enabled
[ 46.668] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[ 46.669] (==) modeset(0): DPMS enabled
[ 46.669] (II) Initializing extension Generic Event Extension
[ 46.669] (II) Initializing extension SHAPE
[ 46.669] (II) Initializing extension MIT-SHM
[ 46.669] (II) Initializing extension XInputExtension
[ 46.670] (II) Initializing extension XTEST
[ 46.671] (II) Initializing extension BIG-REQUESTS
[ 46.671] (II) Initializing extension SYNC
[ 46.671] (II) Initializing extension XKEYBOARD
[ 46.671] (II) Initializing extension XC-MISC
[ 46.671] (II) Initializing extension XFIXES
[ 46.671] (II) Initializing extension RENDER
[ 46.671] (II) Initializing extension RANDR
[ 46.671] (II) Initializing extension COMPOSITE
[ 46.671] (II) Initializing extension DAMAGE
[ 46.671] (II) Initializing extension MIT-SCREEN-SAVER
[ 46.671] (II) Initializing extension DOUBLE-BUFFER
[ 46.671] (II) Initializing extension RECORD
[ 46.671] (II) Initializing extension DPMS
[ 46.671] (II) Initializing extension Present
[ 46.672] (II) Initializing extension DRI3
[ 46.672] (II) Initializing extension X-Resource
[ 46.672] (II) Initializing extension XVideo
[ 46.672] (II) Initializing extension XVideo-MotionCompensation
[ 46.672] (II) Initializing extension GLX
[ 46.672] (II) AIGLX: Screen 0 is not DRI2 capable
[ 46.832] (II) IGLX: Loaded and initialized swrast
[ 46.832] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 46.832] (II) Initializing extension XFree86-VidModeExtension
[ 46.832] (II) Initializing extension XFree86-DGA
[ 46.832] (II) Initializing extension XFree86-DRI
[ 46.833] (II) Initializing extension DRI2
[ 46.835] (II) modeset(0): Damage tracking initialized
[ 47.584] (II) config/udev: Adding input device Logitech K400 Plus (/dev/input/event1)
[ 47.584] (**) Logitech K400 Plus: Applying InputClass "evdev pointer catchall"
[ 47.584] (**) Logitech K400 Plus: Applying InputClass "evdev keyboard catchall"
[ 47.584] (**) Logitech K400 Plus: Applying InputClass "libinput pointer catchall"
[ 47.584] (**) Logitech K400 Plus: Applying InputClass "libinput keyboard catchall"
[ 47.584] (**) Logitech K400 Plus: Applying InputClass "keyboard-all"
[ 47.584] (**) Logitech K400 Plus: Applying InputClass "libinput keyboard catchall"
[ 47.584] (II) LoadModule: "libinput"
[ 47.585] (II) Loading /usr/lib64/xorg/modules/input/libinput_drv.so
[ 47.609] (II) Module libinput: vendor="X.Org Foundation"
[ 47.609] compiled for 1.20.13, module version = 1.2.0
[ 47.609] Module class: X.Org XInput Driver
[ 47.609] ABI class: X.Org XInput driver, version 24.1
[ 47.609] (II) Using input driver 'libinput' for 'Logitech K400 Plus'
[ 47.609] (**) Logitech K400 Plus: always reports core events
[ 47.609] (**) Option "Device" "/dev/input/event1"
[ 47.611] (**) Option "_source" "server/udev"
[ 47.646] (II) event1 - Logitech K400 Plus: is tagged by udev as: Keyboard Mouse
[ 47.646] (II) event1 - Logitech K400 Plus: device is a pointer
[ 47.646] (II) event1 - Logitech K400 Plus: device is a keyboard
[ 47.647] (II) event1 - Logitech K400 Plus: device removed
[ 47.681] (II) libinput: Logitech K400 Plus: needs a virtual subdevice
[ 47.681] (**) Option "config_info" "udev:/sys/devices/platform/fd840000.usb/usb3/3-1/3-1:1.2/000"
[ 47.681] (II) XINPUT: Adding extended input device "Logitech K400 Plus" (type: MOUSE, id 6)
[ 47.682] (**) Option "AccelerationScheme" "none"
[ 47.683] (**) Logitech K400 Plus: (accel) selected scheme none/0
[ 47.683] (**) Logitech K400 Plus: (accel) acceleration factor: 2.000
[ 47.683] (**) Logitech K400 Plus: (accel) acceleration threshold: 4
[ 47.687] (II) event1 - Logitech K400 Plus: is tagged by udev as: Keyboard Mouse
[ 47.687] (II) event1 - Logitech K400 Plus: device is a pointer
[ 47.687] (II) event1 - Logitech K400 Plus: device is a keyboard
[ 47.690] (II) config/udev: Adding input device Logitech K400 Plus (/dev/input/mouse0)
[ 47.690] (II) No input driver specified, ignoring this device.
[ 47.690] (II) This device may have been added with another device file.
[ 47.692] (II) config/udev: Adding input device Analog RK817 Headphones (/dev/input/event0)
[ 47.693] (II) No input driver specified, ignoring this device.
[ 47.693] (II) This device may have been added with another device file.
[ 47.722] (**) Logitech K400 Plus: Applying InputClass "evdev pointer catchall"
[ 47.723] (**) Logitech K400 Plus: Applying InputClass "evdev keyboard catchall"
[ 47.723] (**) Logitech K400 Plus: Applying InputClass "libinput pointer catchall"
[ 47.723] (**) Logitech K400 Plus: Applying InputClass "libinput keyboard catchall"
[ 47.723] (**) Logitech K400 Plus: Applying InputClass "keyboard-all"
[ 47.723] (**) Logitech K400 Plus: Applying InputClass "libinput keyboard catchall"
[ 47.723] (II) Using input driver 'libinput' for 'Logitech K400 Plus'
[ 47.723] (**) Logitech K400 Plus: always reports core events
[ 47.723] (**) Option "Device" "/dev/input/event1"
[ 47.723] (**) Option "_source" "_driver/libinput"
[ 47.723] (II) libinput: Logitech K400 Plus: is a virtual subdevice
[ 47.724] (**) Option "config_info" "udev:/sys/devices/platform/fd840000.usb/usb3/3-1/3-1:1.2/000"
[ 47.724] (II) XINPUT: Adding extended input device "Logitech K400 Plus" (type: KEYBOARD, id 7)
[ 47.724] (**) Option "xkb_layout" "us"
[ 47.724] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"Code:
[ 130.246] (II) modeset(0): EDID vendor "SNY", prod id 50179
[ 130.247] (II) modeset(0): Using EDID range info for horizontal sync
[ 130.247] (II) modeset(0): Using EDID range info for vertical refresh
[ 130.247] (II) modeset(0): Printing DDC gathered Modelines:
[ 130.247] (II) modeset(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 )
[ 130.247] (II) modeset(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 )
[ 130.248] (II) modeset(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094)
[ 130.248] (II) modeset(0): Modeline "1920x1080"x0.0 148.50 1920 2448 2492 2640 1080 1084 1089 )
[ 130.248] (II) modeset(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094)
[ 130.248] (II) modeset(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 )
[ 130.248] (II) modeset(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 )
[ 130.248] (II) modeset(0): Modeline "1920x1080"x0.0 74.25 1920 2008 2052 2200 1080 1084 1089 )
[ 130.248] (II) modeset(0): Modeline "1280x720"x0.0 59.40 1280 3040 3080 3300 720 725 730 750 )
[ 130.248] (II) modeset(0): Modeline "1280x720"x0.0 74.25 1280 3040 3080 3300 720 725 730 750 )
[ 130.248] (II) modeset(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsyn)
[ 130.248] (II) modeset(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625)
[ 130.248] (II) modeset(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsyn)
[ 130.248] (II) modeset(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525)
[ 130.248] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsyn)
[ 130.248] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsy)
[ 130.248] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 )
[ 130.248] (II) modeset(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 )
[ 130.249] (II) modeset(0): Modeline "1600x900"x60.0 119.00 1600 1696 1864 2128 900 901 904 932)
[ 130.249] (II) modeset(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 )
[ 130.249] (II) modeset(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 )
[ 130.249] (--) modeset(0): HDMI max TMDS frequency 300000KHzonce the screen starts working it seems to continue working after a reboot
I even get some terminal stuff on the screen before X windows starts up.
In fact even if I do a halt, disconnect the power and then do a cold boot, the screen works.
I'm not getting a DHCP IP address from the eth0 though
RE: slarm64 (unofficial slackware) Quartz64 RK3566 (aarch64) - mara - 12-07-2021
(12-07-2021, 10:28 AM)dieselnutjob Wrote: I'm not getting a DHCP IP address from the eth0 though
I confirm until the reason is incomprehensible.
RE: slarm64 (unofficial slackware) Quartz64 RK3566 (aarch64) - mara - 12-09-2021
update kernel 4.19.220
slarm64-current-aarch64-server-quartz64-4.19.220-build-20211208.img.zst
slarm64-current-aarch64-server-quartz64-4.19.220-build-20211208.img.zst.sha256
slarm64-current-aarch64-xfce-quartz64-4.19.220-build-20211208.img.zst
slarm64-current-aarch64-xfce-quartz64-4.19.220-build-20211208.img.zst.sha256
RE: slarm64 (unofficial slackware) Quartz64 RK3566 (aarch64) - dieselnutjob - 12-12-2021
mara, if I compile my own Kernel and want to drop it into your SLARM64 image, how would I create a new uInitrd file please?
RE: slarm64 (unofficial slackware) Quartz64 RK3566 (aarch64) - mara - 12-12-2021
(12-12-2021, 02:56 PM)dieselnutjob Wrote: mara, if I compile my own Kernel and want to drop it into your SLARM64 image, how would I create a new uInitrd file please?
for this there is /boot/rebuild-initrd.sh, boot with the new kernel and run the script.
or use the function from the assembly script.
RE: slarm64 (unofficial slackware) Quartz64 RK3566 (aarch64) - tllim - 01-24-2022
(12-09-2021, 05:27 AM)mara Wrote: update kernel 4.19.220
slarm64-current-aarch64-server-quartz64-4.19.220-build-20211208.img.zst
slarm64-current-aarch64-server-quartz64-4.19.220-build-20211208.img.zst.sha256
slarm64-current-aarch64-xfce-quartz64-4.19.220-build-20211208.img.zst
slarm64-current-aarch64-xfce-quartz64-4.19.220-build-20211208.img.zst.sha256
The above XFCE has broken link, here is the working link: http://dl.slarm64.org/slackware/images/quartz64/slarm64-current-aarch64-xfce-quartz64-4.19.220-build-20211208.img.zst
RE: slarm64 (unofficial slackware) Quartz64 RK3566 (aarch64) - dieselnutjob - 01-28-2022
Hi Mara
If I compile and boot a kernel that I compiled myself, how do I populate /lib/modules/{version}?
currently I only have /lib/modules/{oldversion}
I can see all of the .ko files listed when the modules were compiled, but then there are all the other files like aliases
I am assuming that there is some normal way to do it that I don't know.
Until I have a /lib/modules I can't run rebuild-initrd.sh
RE: slarm64 (unofficial slackware) Quartz64 RK3566 (aarch64) - mara - 01-28-2022
(01-28-2022, 05:21 PM)dieselnutjob Wrote: Hi Mara
If I compile and boot a kernel that I compiled myself, how do I populate /lib/modules/{version}?
currently I only have /lib/modules/{oldversion}
I can see all of the .ko files listed when the modules were compiled, but then there are all the other files like aliases
I am assuming that there is some normal way to do it that I don't know.
Until I have a /lib/modules I can't run rebuild-initrd.sh
after compiling you did:
Code:
make O=$(pwd) ARCH=arm64 INSTALL_MOD_PATH=/lib/modules modules_installRE: slarm64 (unofficial slackware) Quartz64 RK3566 (aarch64) - dieselnutjob - 01-28-2022
(01-28-2022, 05:27 PM)mara Wrote:(01-28-2022, 05:21 PM)dieselnutjob Wrote: Hi Mara
If I compile and boot a kernel that I compiled myself, how do I populate /lib/modules/{version}?
currently I only have /lib/modules/{oldversion}
I can see all of the .ko files listed when the modules were compiled, but then there are all the other files like aliases
I am assuming that there is some normal way to do it that I don't know.
Until I have a /lib/modules I can't run rebuild-initrd.sh
after compiling you did:
Code:make O=$(pwd) ARCH=arm64 INSTALL_MOD_PATH=/lib/modules modules_install
I am cross compiling on a normal PC. Does that make a difference?
RE: slarm64 (unofficial slackware) Quartz64 RK3566 (aarch64) - mara - 01-28-2022
(01-28-2022, 06:04 PM)dieselnutjob Wrote:(01-28-2022, 05:27 PM)mara Wrote:(01-28-2022, 05:21 PM)dieselnutjob Wrote: Hi Mara
If I compile and boot a kernel that I compiled myself, how do I populate /lib/modules/{version}?
currently I only have /lib/modules/{oldversion}
I can see all of the .ko files listed when the modules were compiled, but then there are all the other files like aliases
I am assuming that there is some normal way to do it that I don't know.
Until I have a /lib/modules I can't run rebuild-initrd.sh
after compiling you did:
Code:make O=$(pwd) ARCH=arm64 INSTALL_MOD_PATH=/lib/modules modules_install
I am cross compiling on a normal PC. Does that make a difference?
no, specify where to install the modules and then transfer to the sdcard