+- PINE64 (https://forum.pine64.org)
+-- Forum: Pinebook (https://forum.pine64.org/forumdisplay.php?fid=76)
+--- Forum: Pinebook Hardware and Accessories (https://forum.pine64.org/forumdisplay.php?fid=80)
+--- Thread: Bad EMMC (/showthread.php?tid=5067)
RE: Bad EMMC - erchache2000 - 10-17-2017
1- boot stable version from sd card using pine installer.
2- sudo ./pine64_update_kernel.sh 0.7.19
sudo ./pine64_update_uboot.sh 0.7.19
sudo ./pine64_update_package.sh 0.7.19
3- reboot
4- pine64_install_to_emmc.sh xenial-mate 0.7.19
I find the yellow brick path to OZ :-P
RE: Bad EMMC - Wizzard - 10-17-2017
(10-16-2017, 01:59 AM)ayufan Wrote: Thanks jbk on helping to figure out how we should fix that
Once you run Pinebook, try to edit `/boot/uEnv.txt` and enable `emmc_compat=150mhz` mode which bumps the eMMC performance from usual 80MB/s to around 120MB/s.
This fix also helps with 16GB/32GB performance.
I tried 150 MHz and it is faster, from about 75 to more than 100 MB/s. Can I try 200 Mhz on stock eMMc?
RE: Bad EMMC - ayufan - 10-17-2017
You can try, but it didn't work for me stable.
RE: Bad EMMC - Wizzard - 10-17-2017
It does not boot with this settings, it does not go after initial Pinebook logo.
It does not recognize other values except 150 and 200?
RE: Bad EMMC - ayufan - 10-17-2017
Nope. The default is 100MHz, and on Pinebook it seems that 150MHz is working correctly.
RE: Bad EMMC - jcmartint - 11-29-2017
(10-17-2017, 02:55 AM)erchache2000 Wrote: 1- boot stable version from sd card using pine installer.
2- sudo ./pine64_update_kernel.sh 0.7.19
sudo ./pine64_update_uboot.sh 0.7.19
sudo ./pine64_update_package.sh 0.7.19
3- reboot
4- pine64_install_to_emmc.sh xenial-mate 0.7.19
I find the yellow brick path to OZ :-P
hello erchache2000 i have the same problem with the emmc64Gb and I am not able to install the OS on it. I boot with SD and Pinebook tells me that it does not detect the emmc, I have tried with the old 16Gb and it works perfectly. Could you help me?
Thank you.
RE: Bad EMMC - tllim - 12-03-2017
(11-29-2017, 06:57 AM)jcmartint Wrote:(10-17-2017, 02:55 AM)erchache2000 Wrote: 1- boot stable version from sd card using pine installer.
2- sudo ./pine64_update_kernel.sh 0.7.19
sudo ./pine64_update_uboot.sh 0.7.19
sudo ./pine64_update_package.sh 0.7.19
3- reboot
4- pine64_install_to_emmc.sh xenial-mate 0.7.19
I find the yellow brick path to OZ :-P
hello erchache2000 i have the same problem with the emmc64Gb and I am not able to install the OS on it. I boot with SD and Pinebook tells me that it does not detect the emmc, I have tried with the old 16Gb and it works perfectly. Could you help me?
Thank you.
This issue has been resolved on new OS build release. The new eMMC module is 5.1 type and not recognize by old OS build. Please using PINE64 installer download new OS build and retry again.
RE: Bad EMMC - shirman - 12-04-2017
There is no way to keep existing i3 setup and all packages what I installed to move to new emmc module?
RE: Bad EMMC - erchache2000 - 12-08-2017
(11-29-2017, 06:57 AM)jcmartint Wrote:(10-17-2017, 02:55 AM)erchache2000 Wrote: 1- boot stable version from sd card using pine installer.
2- sudo ./pine64_update_kernel.sh 0.7.19
sudo ./pine64_update_uboot.sh 0.7.19
sudo ./pine64_update_package.sh 0.7.19
3- reboot
4- pine64_install_to_emmc.sh xenial-mate 0.7.19
I find the yellow brick path to OZ :-P
hello erchache2000 i have the same problem with the emmc64Gb and I am not able to install the OS on it. I boot with SD and Pinebook tells me that it does not detect the emmc, I have tried with the old 16Gb and it works perfectly. Could you help me?
Thank you.
You need to boot from SD card, and upgrade SD card before install to emmc.
SD card has stable version and you need to upgrade to 0.7.19 to get emmc correctly.
RE: Bad EMMC - jcmartint - 02-17-2018
(12-08-2017, 03:42 AM)erchache2000 Wrote:(11-29-2017, 06:57 AM)jcmartint Wrote:(10-17-2017, 02:55 AM)erchache2000 Wrote: 1- boot stable version from sd card using pine installer.
2- sudo ./pine64_update_kernel.sh 0.7.19
sudo ./pine64_update_uboot.sh 0.7.19
sudo ./pine64_update_package.sh 0.7.19
3- reboot
4- pine64_install_to_emmc.sh xenial-mate 0.7.19
I find the yellow brick path to OZ :-P
hello erchache2000 i have the same problem with the emmc64Gb and I am not able to install the OS on it. I boot with SD and Pinebook tells me that it does not detect the emmc, I have tried with the old 16Gb and it works perfectly. Could you help me?
Thank you.
You need to boot from SD card, and upgrade SD card before install to emmc.
SD card has stable version and you need to upgrade to 0.7.19 to get emmc correctly.
Thanks a lot!!! I also see the light!!!!