+- PINE64 (https://forum.pine64.org)
+-- Forum: PINE A64(+) (https://forum.pine64.org/forumdisplay.php?fid=4)
+--- Forum: Linux on Pine A64(+) (https://forum.pine64.org/forumdisplay.php?fid=6)
+---- Forum: Debian (https://forum.pine64.org/forumdisplay.php?fid=24)
+---- Thread: Howto: OctoPrint Working on Pine 64 (/showthread.php?tid=2064)
RE: Howto: OctoPrint Working on Pine 64 - gnvdude - 10-31-2020
(10-28-2020, 03:02 PM)macstibs Wrote: [quote pid='81368' dateline='1603276080']
any chance of getting the webcam.zip?
Just as an FYI - The DietPi image for Pine64 has an installable list of software which includes a version of OctoPrint. Once it's up and running, it will offer you an update to 1.3.4 or whatever the latest is.
Unfortunately, the webcamd package that's listed is also offline and I haven't had a chance to locate/install a substitute yet.
totilolmomanon
(12-04-2016, 06:38 PM)dabone Wrote: I put together an image for a 4gb card with octoprint along with the curaengine, and the ability to restart, reboot, or power off the pine from the web interface.
Octopine 12-04-16 Release
Just download it, write out to your favorite 4gb or greater card, and then login in using pi / raspberry.
The run
sudo resize_rootfs.sh
reboot
I used the pi user name, in hopes that it will be able to update via the web interface.
pi user can sudo without any password now.
Curaengine is installed, along with camera support.
Edit 12-9-16... Updating from Octoprint works!
set the checkout folder to
/home/pi/OctoPrint
Later,
dabone
Unfortunately your link isn't live anymore. Any chance I could get ahold of that file?
[/quote]
Where can I find the webcam.zip file?
RE: Howto: OctoPrint Working on Pine 64 - Impaled - 03-21-2021
I'm trying to get a Filament-Sensor working on my rock64 with armbian installed and octoprint. Any help? Gpio Kris saying failed not a pi device.
RE: Howto: OctoPrint Working on Pine 64 - zer0sig - 07-11-2021
Guess I'll be figuring this out soon as I have my first 3D printer on the way and several PINE devices vs 0 Rpis.
EDIT: gues it's time. Going to probably do a couple of test prints with my fedora notebook and then connect something with wifi to it (I wonder if I can get the H64 to do this well? limited OS options but it's a nice board in terms of specs)