+- PINE64 (https://forum.pine64.org)
+-- Forum: Pinebook Pro (https://forum.pine64.org/forumdisplay.php?fid=111)
+--- Forum: Linux on Pinebook Pro (https://forum.pine64.org/forumdisplay.php?fid=114)
+--- Thread: PBP does not start from postmarket OS image burnt to sd card (/showthread.php?tid=19701)
RE: PBP does not start from postmarket OS image burnt to sd card - zkajdan - 03-10-2025
(03-10-2025, 08:16 AM)tophneal Wrote:(03-07-2025, 06:54 PM)wdt Wrote: is it a 1 or 2 partition image?
uboot will be looking for either boot,scr or extlinux.conf or aarch64.efi (only 1)
any of these must be in correct location
-----
as well, sometimes the paths in extlinux.conf can be wrong, paths are in relation to itself,
I had that happen only last week from my inherited son's pbp
OP is trying to boot an install SD of TowBoot
yes exactly @tophneal @wdt I'm trying to install TowBoot from spi, but I get a u-boot prompt (if I interrupt the boot - otherwise it's the never-stopping message/question from the photo above) whichever way the emmc switch is flipped...
thanks!!
RE: PBP does not start from postmarket OS image burnt to sd card - wdt - 03-10-2025
Well, the 1st post was about installing post-market or repairing manjaro
from the uboot prompt,,,, mmc scan ,,,, setenv boot_target MMC1,,, printenv boot_target ,,,, boot