![]() |
|
Windows 10 IoT finally released on Pine A64 platform - Printable Version +- PINE64 (https://forum.pine64.org) +-- Forum: PINE A64(+) (https://forum.pine64.org/forumdisplay.php?fid=4) +--- Forum: Windows 10 IoT (https://forum.pine64.org/forumdisplay.php?fid=55) +--- Thread: Windows 10 IoT finally released on Pine A64 platform (/showthread.php?tid=1939) |
RE: Windows 10 IoT finally released on Pine A64 platform - robstrat - 01-21-2017 (08-04-2016, 07:27 PM)tllim Wrote: The Pine A64 already passed the Windows 10 Azure IoT certification: https://azure.microsoft.com/en-us/documentation/articles/iot-hub-tested-configurations/ Links for azure and github not working. Code link downloads. Save RE: Windows 10 IoT finally released on Pine A64 platform - carlberg - 02-06-2017 Hi all, Using windows10IoT_pine64_RS1_20161121.ffu (OS Version: 10.0.14393.0), cant seem to get it to boot with WiFi/Bt module, BSOD every time. Remove the module and it starts up fine. Code: Windows Update installs: 10.0.10595
and then when rebooting, it just hangs.
This is what I get on the console.
------------------------
��%���5jR�AXP NumberOfHandles = 1 �U͉ɂJ�с�QIQ�"""jԤ�5�!�����
open hci clock usbc_no:1, is_ohci:1
parser fetch usbc1 usb_drv_vbus_gpio failed
Loading driver�SunxiEthDxeEntryPoint: phy mode = rgmii
gmac_rgmii_select
Loading drive�no key pressed
Sunxi BootCmd = boot-normal
Loading drive�Loading�Loading dr�Loading d�Loading driver at �Loading driv�Loading drive�[PWM Msg]:request pwm success,pwm-base=0x0, pwm_number=1,pwm = 16.
enable power vcc-hdmi-33, ret=0
drv_disp_init finish
[Disp Msg]:board_display_device_open_lcd
[Disp Msg]:boot_disp.output_mode=4
[Disp Msg]:disp0 device type(0) enable
lcd_panel_fun[0].cfg_open_flow is NULL
enable power vcc-dsi-33, ret=0
disp_sys_register_irq, irqNo=121, Handler=0xBE592F09, pArg=0xBE316810
lcd_panel_fun[0].cfg_panel_info is NULL
disp 0, clk: pll(330000000),clk(330000000),dclk(55000000) dsi_rate(55000000)
clk real:pll(330000000),clk(330000000),dclk(82500000) dsi_rate(148500000)
lcd_panel_fun[0].cfg_open_flow is NULL
lcd_panel_fun[0].cfg_open_flow is NULL
[Disp Msg]:board_display_device_open_hdmi
[Disp Msg]:boot_disp.output_mode=4
[Disp Msg]:disp1 device type(0) enable
attched ok, mgr1<-->device0, type=4, mode=4
disp_sys_register_irq, irqNo=119, Handler=0xBE5989E5, pArg=0xBE316610
plugin
[Disp Error]:fetch script data boot_disp.output_full fail
[Disp Msg]:screen_id =1, screen_width =1280, screen_height =720
[Disp Msg]:frame buffer address BF000000
[Disp Msg]:bitcount = 32
[Disp Error]:fetch script data boot_disp.output_full fail
[Disp Msg]:screen_id =0, screen_width =1024, screen_height =600
[Disp Msg]:frame buffer address BF000000
[Disp Msg]:bitcount = 32
Loading driver a�Loading driver �Loading driver at 0x�Loading drive�Loading dri�Loading driver�Loading driver at 0x000BE1AF000 EntryPoint=0x000BE1B26A1 Fat.efi
Loading driv�Driver CB933912-DF8F-4305-B1F9-7B44FA11395C was discovered but not load�+&��+LL'LL���O&Z�+&��+LL'LL��+&��+LL'LL���O&Z�+&��+LL'LL��+&��+LL'LL���O&Z�+&��+LL'LL��+&��+LL'LL���O&Z�+&��+LL'LL��+L[���M[�+ML[�+L[���Sk�E�jمɥ
������꽽ѵr�ɵ��5jRT����݁��с������5jR�Loading driver�ACPI: LoadAcpiFromVolume() failed to open directory
ACPI: Loading ArmBgrt.acpi
read file is NULL
read file is NULL
ACPI: Loading ArmCsrt.acpi
ACPI: Loading ArmDbg2.acpi
ACPI: Loading ArmDsdt.aml
ACPI: Loading ArmFacp.acpi
ACPI: Loading ArmGtdt.acpi
ACPI: Loading ArmMadt.acpi
ACPI: Loaded 7 tables
Install ACPI table by partition file success
no battery exist
read file is NULL
read file is NULL
read file is NULL
Read Logo file Fail, Please Check file exist
show Bootlogo error: Unsupported
PEI 644 ms
DXE 1577 ms
BDS 333 ms
Total Time = 2554 ms
try removeable media boot ------------- Any ideas what is wrong? Cheers -Anders RE: Windows 10 IoT finally released on Pine A64 platform - hvandrie - 02-22-2017 (02-06-2017, 08:35 AM)carlberg Wrote: Hi all, I have reported the exact same problem. Unfortunately sofar no one has reported or followed up since. if anyone with the right sources could help out is very much appreciated. Mod Edit: Post restored - was not a duplicate RE: Windows 10 IoT finally released on Pine A64 platform - MarkHaysHarris777 - 02-22-2017 hi , I removed the duplicate (very lengthy post) and edited the last post with a code block. Please keep lengthy log posts or code within a code block for other user's readability. Thanks.
RE: Windows 10 IoT finally released on Pine A64 platform - hvandrie - 02-23-2017 That was my post which you removed... In short, I already reported earlier the same as carlberg's findings: WiFi + BT add-on causes crash of PINE64 on boot. Just bumping this thread up to confirm his finding. Only, seems to me we're shouting into a void here... or is there progress of any kind on Windows IoT for PINE64? RE: Windows 10 IoT finally released on Pine A64 platform - terone63 - 08-08-2017 quisiera saber si a alguien le funciona el sistema operativo de w10 iot en la pine64+ 2gb.. No me arranca a mi , el archivo .ffu no me sirve...no es autoarrancable.. gracias espero sus respuesta ...saludos desde latinoamerica.. I would like to know if someone works on the w10 IoT operating system on the pine64 + 2gb .. It does not boot me, the .ffu file is not useful ... it is not self-extracting .. Thank you, I hope your answers ... Greetings from Latin America ... |