+- PINE64 (https://forum.pine64.org)
+-- Forum: PinePhone (https://forum.pine64.org/forumdisplay.php?fid=120)
+--- Forum: PinePhone Software (https://forum.pine64.org/forumdisplay.php?fid=121)
+---- Forum: UBPorts on PinePhone (https://forum.pine64.org/forumdisplay.php?fid=125)
+---- Thread: Ubports OTA won't work on my braveheart (/showthread.php?tid=9928)
Pages:
1
2
RE: Ubports OTA won't work on my braveheart - Dmytro - 05-29-2020
(05-22-2020, 10:44 AM)none Wrote: I've tried for a week now. I've followed the ubports install instructions on multiple sd cards and on the emmc using jumpdrive. Nothing works.
I get a ubuntu logo, some non working progress dots, a flickering screen. Sometimes I get to the setup app, it crashes before I can finish.
I had ubports running well on the emmc before the ota img was available, what's gone wrong?
There were memory frequency change in u-boot. Check relevant thread
RE: Ubports OTA won't work on my braveheart - pawlinski - 05-29-2020
I also had problems with images with OTA. The solution was to upload the first OTA image to the microSD card:
https://ci.ubports.com/job/rootfs/job/rootfs-pinephone-systemimage/1/
Then naturally update via OTA. Now everything works fine.
RE: Ubports OTA won't work on my braveheart - tsar_chasm - 06-13-2020
(05-29-2020, 07:51 AM)pawlinski Wrote: I also had problems with images with OTA. The solution was to upload the first OTA image to the microSD card:
https://ci.ubports.com/job/rootfs/job/rootfs-pinephone-systemimage/1/
Then naturally update via OTA. Now everything works fine.
This worked for me too. Thanks for posting this workaround.
I was in the same situation described in this post. No issue booting ubports rootfs-pinephone and other images (mobian, postmarketOS) but the other ubports rootfs-pinephone-systemimage images I had tried failed the initial boot.