+- PINE64 (https://forum.pine64.org)
+-- Forum: ROCKPRO64 (https://forum.pine64.org/forumdisplay.php?fid=98)
+--- Forum: Linux on RockPro64 (https://forum.pine64.org/forumdisplay.php?fid=101)
+--- Thread: [archived] 0.8.X images from ayufan; Mate DE + video / 3d acceleration (/showthread.php?tid=7298)
RE: 0.8.X images from ayufan; Mate DE + video / 3d acceleration - Luke - 03-31-2019
Ah, so a permissions issue it seems? Glad that its sorted.
RE: 0.8.X images from ayufan; Mate DE + video / 3d acceleration - Neo2018 - 04-01-2019
(03-31-2019, 01:57 PM)Luke Wrote: Ah, so a permissions issue it seems? Glad that its sorted.If I understand correctly, YES the problem is in plugin openmediavault-remotedesktop. Read this> post > post2!
RE: 0.8.X images from ayufan; Mate DE + video / 3d acceleration - fosf0r - 04-05-2019
edit: nm, got it
RE: 0.8.X images from ayufan; Mate DE + video / 3d acceleration - bavay - 04-10-2019
Is USB fixed with this release? So far, using a USB3 connected ssd, I end up with filesystem corruptions as soon as there is high IO load, no matter which kernel I use (4.20 or 5.0 from Ayufan as well as Armbian's 4.4.174). The usb enclosure and ssd work very well on my Debian laptop, copying very fast more than 200G of data while to always end up with the kernel throwing up tons of errors and a corrupted filesystem on the RockPro64. I've tried with another power supply (12 V, up to 6A) and this did not fix it, I've tried blacklisting UAS mode (did not prevent it either), connecting on the usb2 ports, nothing currently guarantees robust and stable usage of the disk...
RE: 0.8.X images from ayufan; Mate DE + video / 3d acceleration - Mentaluproar - 04-16-2019
Is there any word on wayland support?
RE: 0.8.X images from ayufan; Mate DE + video / 3d acceleration - Faradn - 04-19-2019
Ayufan -- bionic-mate-rockpro64-0.8.0rc9-1120-armhf.img
1 Took a very long time to boot.
uSD card /root partition was resized using gparted.
2 Mate' DE started with 1280 x 768 resolution.
Changed to 1920 x 1080.
3 All main menu selections cause the screen to blank for ~4 seconds.
4 Delete bottom panel caused the screen to blank for ~4 seconds.
5 DHCP network connection is not displayed in the ``Network Connections''
dialog box.
6 Pressing any button or checkbox widget in the ``Network Connections''
dialog box causes the screen to blank ~4 seconds.
7 Changed IPv4 network connection from automatic to manual, ignore IPv6,
re-enabled networking, cannot enable the network connection. Menu shows
``device not managed''.
So far @Mrfixit2001's Debian 9/Mate' spin is still tops.
RE: 0.8.X images from ayufan; Mate DE + video / 3d acceleration - Bullet64 - 04-20-2019
(04-19-2019, 09:42 AM)Faradn Wrote: Ayufan -- bionic-mate-rockpro64-0.8.0rc9-1120-armhf.img
1 Took a very long time to boot.
uSD card /root partition was resized using gparted.
Do you use wifi-modul from pine64 ? Without this modul i have long boot time. With that modul all is fine!?
RE: 0.8.X images from ayufan; Mate DE + video / 3d acceleration - Faradn - 04-20-2019
Thank you for your response.
Forgive me, but I don't know why a module - for hardware
I don't have installed [ bluetooth/wifi ] - would cause boot
time around 3 minutes and screen blanking for about 4 seconds
with any main menu activity or any app/widget activities
would fix these issues. The module wouldn't have been loaded
by the kernel.
/Faradn
~~~~~~~~~~~~~~~~~~~~~~~~~~~
HummingBoard I2EX 1Gb
Raspberry Pi 3B 1Gb
Odroid XU4 2Gb
Pine64 RockPro64 4Gb
RE: 0.8.X images from ayufan; Mate DE + video / 3d acceleration - benjhm - 04-26-2019
Hello. I have a rockpro64 using eemc, wifi/bt (pine), PCIE-SATA (pine), NAS box, it’s nice hardware.
Back in November I tried ayufan’s 0.7.11 images, including with a mate desktop. The desktop worked (without wifi etc). PCIE-SATA worked via a ssh terminal, but crashed -everything froze -as soon as I tried to log into the desktop.
I wanted to setup lots of stuff on a general multi-functional system - both desktop and home-NAS, so I waited.
A couple weeks ago I tried MrFixit’s new desktop image, and most things worked, including mounting the SATA from within the desktop, but I still had some issues including wifi/bt not connecting.
So I came back to try ayufan’s latest 0.8.0rc10 (armhf) desktop-mate image. Now wifi just works - first time out of many images tried. Most other desktop software worked although still some issues with sound, and the system seems unstable - crashes during various activities after some minutes. However, most importantly to me, I could no longer mount the SATA from the desktop - the partitions show up in file manager or using ls -dev/disk/by-label , but lspci or any mount operation crashed everything.
So I tried ayufan’s 0.8.0rc10 (arm64) bionic-minimal. With this I can mount my SATA drive OK.
Onto this base I installed ubuntu-mate-desktop using tasksel. I got a login-loop problem, which couldn’t solve, but got around that using sudo startx from tty3. This time, my SATA partitions work, from within the desktop - e.g. I can view photos stored there. Wifi still works. Libreoffice works. QGIS works. I can’t test browsers due to a user mismatch - it seems x display is root (as I used sudo startx?) but home is rock64. Note this is an arm64 build (not armhf as you recommend), but it’s progress for me. When I tried instead installing mate onto minimal with arm64 using ayufan’s script, I couldn’t get X to start.
In general, I saw each feature of this rockpro64 working nicely, but still never all together from one image, it’s a pity.
RE: 0.8.X images from ayufan; Mate DE + video / 3d acceleration - Diesel141 - 04-27-2019
I love this distro Mate desktop. Everything works great except the FAN. CPU gets very hot without the FAN running. I ran the software updater. Still no working FAN. I really want to keep using this OS. Anyone have a fix for the FAN please?
I installed bionic-mate-rockpro64-0.8.0rc10-1125-armhf.img.xz.