(12-25-2018, 07:01 AM)Neo2018 Wrote: I can not integrate that into the welcome message.
I do not get far with Google Search.
I'm not a noob but that's new to me.
Can you please tell me what I can use in my case? You had to do with it too?
Thank you very much!
Merry Charismas !

(12-25-2018, 07:39 AM)tuxd3v Wrote: You can find via SysFs the Temperature on this locations:

Code:

root@rockpro64:/# find /sys/class/thermal/thermal_zone{0,1}/ -name temp -exec ls {} \; -exec cat {} \;
/sys/class/thermal/thermal_zone0/temp
53888
/sys/class/thermal/thermal_zone1/temp
45000

(12-25-2018, 01:19 PM)Neo2018 Wrote:

(12-25-2018, 07:39 AM)tuxd3v Wrote: You can find via SysFs the Temperature on this locations:

Code:

root@rockpro64:/# find /sys/class/thermal/thermal_zone{0,1}/ -name temp -exec ls {} \; -exec cat {} \;
/sys/class/thermal/thermal_zone0/temp
53888
/sys/class/thermal/thermal_zone1/temp
45000

I did not expect such a quick response, thank you.
I forgot to mention that, of course, I also found this command (in /etc/ats.conf) and used. I was not sure if he was right.

Code:

#!/bin/bash
TEMP1=`awk '{print substr($1,1,2)}'  /sys/class/thermal/thermal_zone1/temp`
TEMP=`awk '{print substr($1,1,2)}'  /sys/class/thermal/thermal_zone0/temp`
echo "
\033[0;35m+    \033[0;37mTemperatur \033[0;35m= \033[1;32mCPU $TEMP  C GPU $TEMP1  C
"tput sgr0

output>
root@RockHomeServer:~# sh te.sh
+    Temperatur = CPU 39°C GPU 38°C

That's right? Or can do better? Can you do it with decimal? So> 39.4°C

Perfect thank you
Ps: Waiting for the delivery from Aliexpress "KSD9700 40-NO" is coming soon!

(12-25-2018, 02:01 PM)tuxd3v Wrote: Its ok, you can also use decimal values with awk..

Code:

TEMP=`awk '{ print substr( $1, 1, 3 ) / 10 }' /sys/class/thermal/thermal_zone0/temp`
TEMP1=`awk '{ print substr( $1, 1, 3 ) / 10 }' /sys/class/thermal/thermal_zone1/temp`

(01-28-2019, 03:24 PM)stFfn Wrote: ( ... )
** PLATFORM = linux**
** OS       = 32Bits**
** ARCH     = aarch64 **
( ... )
Error: Build error: Failed building.

  

(02-05-2019, 02:01 PM)Neo2018 Wrote: [ENGLISH/GERMANY]
After a long wait and lack of time, I managed to install the second 80mm fan.
Here are a few pictures of construction together.

Nach langen warten und Zeitmangel habe ich es geschafft den zweiten 80mm Lüfter einzubauen.
Hier ein Paar Bilder von zusammen Bau.


I decided to place the sensor directly on the HDD because it gives off the most heat. When using the HDD, we reached a temperature of about 40°C quickly. Standard temperature is around 35°C, so it was important for me to keep the temperature below 40°C when using the HDD.

Ich habe entschieden den Sensor direkt auf die HDD zu platzieren, weil sie am meisten Wärme abgibt. Bei Einsatz der HDD wir eine Temperatur von ca. 40°C  schnell erreicht. Standard Temperatur ist bei ca. 35°C deshalb war mir wicht, bei Einsatz der HDD die Temperatur unter 40°C zu halten.

Zum Sensor Test To the sensor test - KSD9700 / 250V 5A 40°C / ON 40°C  OFF 29°C

(02-06-2019, 07:27 AM)tuxd3v Wrote: I noticed that you are using Seagate IronWolf disks..
Those cat handle a max temp of 70C, WesternDigital max out at 60C..
I also have IronWolfs in my setup.. 
I made a tutorial that you will need for Seagate disks:
https://forum.pine64.org/showthread.php?tid=7137