![]() |
|
PCIe -> SATA and NVMe work as of 0.6.59 - Printable Version +- PINE64 (https://forum.pine64.org) +-- Forum: ROCKPRO64 (https://forum.pine64.org/forumdisplay.php?fid=98) +--- Forum: Linux on RockPro64 (https://forum.pine64.org/forumdisplay.php?fid=101) +--- Thread: PCIe -> SATA and NVMe work as of 0.6.59 (/showthread.php?tid=6242) Pages:
1
2
|
RE: PCIe -> SATA and NVMe work as of 0.6.59 - Bullet64 - 07-25-2018 (07-25-2018, 12:47 PM)dukla2000 Wrote:(07-25-2018, 05:17 AM)Bullet64 Wrote: Look -> https://gist.github.com/ayufan/30c46381c5e4e5c5264a834a752946dbI did see on his lspci output it was reported as I remember, that Ayufan postet that he has an 960 Pro. But that is only from my memory, I can be wrong too. Waiting for Ayufan... RE: PCIe -> SATA and NVMe work as of 0.6.59 - ayufan - 07-30-2018 I do have 960Pro but in my PC. For RockPro64 I use separate NVMe drive with SM961 (This is on sticker). RE: PCIe -> SATA and NVMe work as of 0.6.59 - jzhang18 - 08-02-2018 Is it possible to switch system root "\" to PCIe NVMe SSD? or Boot directly from PCIe NVMe SSD? Hopefully someone can figure it out how to do it. thanks RE: PCIe -> SATA and NVMe work as of 0.6.59 - dukla2000 - 08-06-2018 I managed to get a used 128GB SM961 for a bargain price: came with some no-name PCIe adapter and worked first time: Code: /ssd$ sudo iozone -e -I -a -s 100M -r 4k -r 16k -r 512k -r 1024k -r 16384k -i 0 -i 1 -i 2
Iozone: Performance Test of File I/O
Version $Revision: 3.429 $
Compiled for 64 bit mode.
Build: linux
Contributors:William Norcott, Don Capps, Isom Crawford, Kirby Collins
Al Slater, Scott Rhine, Mike Wisner, Ken Goss
Steve Landherr, Brad Smith, Mark Kelly, Dr. Alain CYR,
Randy Dunlap, Mark Montague, Dan Million, Gavin Brebner,
Jean-Marc Zucconi, Jeff Blomberg, Benny Halevy, Dave Boone,
Erik Habbinga, Kris Strecker, Walter Wong, Joshua Root,
Fabrice Bacchella, Zhenghua Xue, Qin Li, Darren Sawyer,
Vangel Bojaxhi, Ben England, Vikentsi Lapa.
Run began: Mon Aug 6 18:16:56 2018
Include fsync in write timing
O_DIRECT feature enabled
Auto Mode
File size set to 102400 kB
Record Size 4 kB
Record Size 16 kB
Record Size 512 kB
Record Size 1024 kB
Record Size 16384 kB
Command line used: iozone -e -I -a -s 100M -r 4k -r 16k -r 512k -r 1024k -r 16384k -i 0 -i 1 -i 2
Output is in kBytes/sec
Time Resolution = 0.000001 seconds.
Processor cache size set to 1024 kBytes.
Processor cache line size set to 32 bytes.
File stride size set to 17 * record size.
random random bkwd record stride
kB reclen write rewrite read reread read write read rewrite read fwrite frewrite fread freread
102400 4 97119 119275 141604 141757 46120 81382
102400 16 264668 349135 374752 381088 116056 253526
102400 512 747897 764013 740837 850397 748669 759626
102400 1024 646955 760683 795914 1002654 895096 761269
102400 16384 700665 741865 1002589 1239458 1229366 747861
iozone test complete )
|