+- PINE64 (https://forum.pine64.org)
+-- Forum: ROCK64 (https://forum.pine64.org/forumdisplay.php?fid=85)
+--- Forum: Linux on Rock64 (https://forum.pine64.org/forumdisplay.php?fid=88)
+--- Thread: Dual boot options for ROCK64? (/showthread.php?tid=5363)
RE: Dual boot options for ROCK64? - Tony32 - 01-16-2018
(01-15-2018, 01:51 PM)Luke Wrote: ayufan just got SPI working last week - this holds the promise of multibooting different OS'. I wouldn't expect this anytime super-soon, but now at least the possibility is real.Well, that is good news. Even if I have to wait a bit. Thanks.
(01-15-2018, 01:51 PM)maal Wrote: What works for me:Not really sure what you would like me to do with this, but I think the first bit of code is the OSes/kernels you can chose from on boot? If that's the case, neat! As mentioned earlier, if you could make a how-to, that would be lovely
/boot/extlinux/extlinux.conf
Code:TIMEOUT 30
DEFAULT kernel-4.14
MENU TITLE Rock64 boot options
LABEL kernel-4.14
kernel /boot/Image-4.14
fdt /boot/rk3328-rock64.dtb-4.14
append earlycon=uart8250,mmio32,0xff130000 rw root=/dev/mmcblk0p1 rootwait rootfstype=ext4 init=/sbin/init coherent_pool=1M ethaddr=${ethaddr} eth1addr=${eth1addr} serial=${serial#}
LABEL kernel-4.15-rc6
kernel /boot/Image-4.15-rc6
fdt /boot/rk3328-rock64.dtb-4.15-rc6
append earlycon=uart8250,mmio32,0xff130000 rw root=/dev/mmcblk0p1 rootwait rootfstype=ext4 init=/sbin/init coherent_pool=1M ethaddr=${ethaddr} eth1addr=${eth1addr} serial=${serial#}
LABEL kernel-4.4
kernel /boot/Image
initrd /boot/initrd.img
fdt /boot/dtb
append earlycon=uart8250,mmio32,0xff130000 rw root=LABEL=linux-root rootwait rootfstype=ext4 init=/sbin/init coherent_pool=1M ethaddr=${ethaddr} eth1addr=${eth1addr} serial=${serial#}
Boot log:
Code:DDR version 1.06 20170424
In
LPDDR3
786MHz
Bus Width=32 Col=11 Bank=8 Row=15/15 CS=2 Die Bus-Width=32 Size=4096MB
ddrconfig:7
OUT
Boot1 Release Time: 2017-05-18, version: 2.43
ChipType = 0x11, 127
emmc reinit
emmc reinit
SdmmcInit=2 20
SdmmcInit=0 0
BootCapSize=0
UserCapSize=15084MB
FwPartOffset=2000 , 0
StorageInit ok = 50220
Raw SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit ret = 0, SecureMode = 0
LoadTrustBL
No find bl30.bin
No find bl32.bin
Load uboot, ReadLba = 2000
Load OK, addr=0x200000, size=0x7bd90
RunBL31 0x10000
NOTICE: BL31: v1.4(release):v1.4-218-g3b6ceeff
NOTICE: BL31: Built : 11:11:11, Sep 30 2017
NOTICE: BL31:Rockchip release version: v1.2
U-Boot 2017.09-00396-g6ca43a58db (Sep 30 2017 - 11:11:57 +0200)
Model: Rockchip RK3328 EVB
DRAM: 4 GiB
MMC: rksdmmc@ff500000: 1, rksdmmc@ff520000: 0
*** Warning - bad CRC, using default environment
In: serial@ff130000
Out: serial@ff130000
Err: serial@ff130000
Model: Rockchip RK3328 EVB
Net: Net Initialization Skipped
No ethernet found.
Hit any key to stop autoboot: 0
Card did not respond to voltage select!
mmc_init: -95, time 9
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Found /boot/extlinux/extlinux.conf
Retrieving file: /boot/extlinux/extlinux.conf
891 bytes read in 73 ms (11.7 KiB/s)
Rock64 boot options
1: kernel-4.14
2: kernel-4.15-rc6
3: kernel-4.4
Enter choice: 2
2: kernel-4.15-rc6
Retrieving file: /boot/Image-4.15-rc6
13763072 bytes read in 1312 ms (10 MiB/s)
append: earlycon=uart8250,mmio32,0xff130000 rw root=/dev/mmcblk0p1 rootwait rootfstype=ext4 init=/sbin/init coherent_pool=1M ethaddr= eth1addr= serial=
Retrieving file: /boot/rk3328-rock64.dtb-4.15-rc6
30605 bytes read in 101 ms (295.9 KiB/s)
## Flattened Device Tree blob at 01f00000
Booting using the fdt blob at 0x1f00000
Loading Device Tree to 00000000fcf27000, end 00000000fcf3178c ... OK
Starting kernel ...
RE: Dual boot options for ROCK64? - Luke - 01-16-2018
(01-15-2018, 03:45 PM)maal Wrote: No, sorry - setting this up was a process of trial and error.
Useful link: http://www.syslinux.org/wiki/index.php?title=Config
No worries. I will try to replicate it. Just one question, have you tried with rootfs on USB thumb-drives ?
RE: Dual boot options for ROCK64? - maal - 01-16-2018
(01-16-2018, 04:11 AM)Luke Wrote:(01-15-2018, 03:45 PM)maal Wrote: No, sorry - setting this up was a process of trial and error.
Useful link: http://www.syslinux.org/wiki/index.php?title=Config
No worries. I will try to replicate it. Just one question, have you tried with rootfs on USB thumb-drives ?
No, I tested rootfs on sdcard only.
U-boot also on sdcard (mainline u-boot compiled by me).
RE: Dual boot options for ROCK64? - Luke - 01-16-2018
(01-16-2018, 08:55 AM)maal Wrote:(01-16-2018, 04:11 AM)Luke Wrote:(01-15-2018, 03:45 PM)maal Wrote: No, sorry - setting this up was a process of trial and error.
Useful link: http://www.syslinux.org/wiki/index.php?title=Config
No worries. I will try to replicate it. Just one question, have you tried with rootfs on USB thumb-drives ?
No, I tested rootfs on sdcard only.
U-boot also on sdcard (mainline u-boot compiled by me).
Ok, I assume you just installed syslinux-common on xenial/jessie and took it from there ?
edit: cant seems to find syslinux for arm64 and same goes for extlinux.
RE: Dual boot options for ROCK64? - maal - 01-16-2018
(01-16-2018, 10:06 AM)Luke Wrote:(01-16-2018, 08:55 AM)maal Wrote:(01-16-2018, 04:11 AM)Luke Wrote:(01-15-2018, 03:45 PM)maal Wrote: No, sorry - setting this up was a process of trial and error.
Useful link: http://www.syslinux.org/wiki/index.php?title=Config
No worries. I will try to replicate it. Just one question, have you tried with rootfs on USB thumb-drives ?
No, I tested rootfs on sdcard only.
U-boot also on sdcard (mainline u-boot compiled by me).
Ok, I assume you just installed syslinux-common on xenial/jessie and took it from there ?
edit: cant seems to find syslinux for arm64 and same goes for extlinux.
No, i did not.
All I did was editing /boot/extlinux/extlinux.conf file - u-boot is checking for this file at boot.
RE: Dual boot options for ROCK64? - Luke - 01-16-2018
(01-16-2018, 11:47 AM)maal Wrote:(01-16-2018, 10:06 AM)Luke Wrote:(01-16-2018, 08:55 AM)maal Wrote:(01-16-2018, 04:11 AM)Luke Wrote:(01-15-2018, 03:45 PM)maal Wrote: No, sorry - setting this up was a process of trial and error.
Useful link: http://www.syslinux.org/wiki/index.php?title=Config
No worries. I will try to replicate it. Just one question, have you tried with rootfs on USB thumb-drives ?
No, I tested rootfs on sdcard only.
U-boot also on sdcard (mainline u-boot compiled by me).
Ok, I assume you just installed syslinux-common on xenial/jessie and took it from there ?
edit: cant seems to find syslinux for arm64 and same goes for extlinux.
No, i did not.
All I did was editing /boot/extlinux/extlinux.conf file - u-boot is checking for this file at boot.
Quote:(mainline u-boot compiled by me)
aah. I should read more carefully...
RE: Dual boot options for ROCK64? - ayufan - 01-16-2018
To note, this is also supported by any of my u-boots
RE: Dual boot options for ROCK64? - easyfab - 01-20-2018
I try to do a dual boot with Libreelec based on maal example.
My partitions
Code:
lsblk -o NAME,LABEL,PARTFLAGS,FSTYPE,SIZE
NAME LABEL PARTFLAGS FSTYPE SIZE
mmcblk0rpmb 4M
mmcblk0boot0 4M
mmcblk0boot1 4M
mmcblk0 58,2G
├─mmcblk0p1 3,9M
├─mmcblk0p2 64K
├─mmcblk0p3 4M
├─mmcblk0p4 4M
├─mmcblk0p5 4M
├─mmcblk0p6 boot 0x4 vfat 112M
├─mmcblk0p7 linux-root ext4 48,4G
├─mmcblk0p8 LE_SYSTEM 0x4 vfat 1000M
└─mmcblk0p9 LE_STORAGE ext4 8,8GAnd my extlinux.conf
Code:
TIMEOUT 150
DEFAULT kernel-4.4
MENU TITLE Rock64 boot options
label kernel-4.4
kernel /Image
initrd /initrd.img
fdt /dtb
append earlycon=uart8250,mmio32,0xff130000 rw root=LABEL=linux-root rootwait rootfstype=ext4 init=/sbin/init coherent_pool=1M ethaddr=${ethaddr} eth1addr=${eth1addr} serial=${serial#}
LABEL LibreELEC
LINUX /Image
FDT /rk3328-rock64.dtb
APPEND boot=LABEL=LE_SYSTEM disk=LABEL=LE_STORAGE quiet console=uart8250,mmio32,0xff130000 console=tty0I have copy LibreELEC Image,SYSTEM and rk3328-rock64.dtb on LE_SYSTEM partition. and take example from LibreELEC extlinux.conf
I boot from SPI (using rock64_write_spi_flash.sh )
But I have kernel panics when booting with DEFAULT LibreELEC. I don't know how to select menu when booting I see nothing on screen.
No problem to boot Ubuntu .
Has Someone some ideas ?
RE: Dual boot options for ROCK64? - a1w.ca - 01-21-2018
Thanks to @maal's instructions, I wrote a dual boot tutorial available here:
https://github.com/aw/linux-build/blob/spi-flash-recipes/recipes/dual-booting.md
RE: Dual boot options for ROCK64? - easyfab - 01-22-2018
(01-21-2018, 10:47 PM)a1w.ca Wrote: Thanks to @maal's instructions, I wrote a dual boot tutorial available here:
https://github.com/aw/linux-build/blob/spi-flash-recipes/recipes/dual-booting.md
Thanks,
If I'm correct for TimeOut it's 1/10 s. 120 give 12 s notre 2 min.