+- PINE64 (https://forum.pine64.org)
+-- Forum: PINE A64(+) (https://forum.pine64.org/forumdisplay.php?fid=4)
+--- Forum: Pine A64 Hardware, Accessories and POT (https://forum.pine64.org/forumdisplay.php?fid=32)
+---- Forum: LCD and Touch Panel (https://forum.pine64.org/forumdisplay.php?fid=37)
+---- Thread: Touch screen support (/showthread.php?tid=2102)
Pages:
1
2
RE: Touch screen support - DonFL - 08-31-2016
(08-31-2016, 07:29 AM)shariq_2001 Wrote:(08-30-2016, 07:38 PM)DonFL Wrote: https://www.amazon.com/Tontec%C2%AE-Raspberry-Display-AT070TN90-Controller/dp/B00G60FJNG/ref=pd_bxgy_147_3?ie=UTF8&psc=1&refRID=DYWZ9XJ8TNWHHCSMWP7K
I originally picked this one up for the pi, have verified it works with the Pine. Probably not the best option in a space limited situation, but as a basic lcd screen, its not too bad.
Hi DonFL
Was touch available on that screen? Graphics and usability good with the pine for that LCD?
How hard was it to get going in terms of drivers and setup?
Thanks
There is a touch add-on available. I messed with it for just a little bit on the Pi, it worked, but never pursued it. Got some help from a friend on the touch-screen setup, would not consider it "easy". I honestly can't really remember why I picked it (screen and touch kit) up in the first place, its been sitting on the shelf for over a year.
However, for just the screen alone, its plug and play. Power the interface board, make the hdmi connection, and you're good to go.
Graphics are clear, but its a small screen; that said, all I did was plug it in and power it up and make sure it was functional with the Pine, did not try to tweak the graphics/video settings in any way.
RE: Touch screen support - vintagewaffle - 10-26-2016
So just as an update, I currently have the pine64 lcd working with touch under armbian.
Everything is out there and supported, it just needs to all come together.
I'm still fiddling with still having hdmi enabled and to either have the lcd automatically detected, or a simple switch to enable it before I have anything that could be included in a build.
I will try to update with the actual steps I used if anyone is interested.
RE: Touch screen support - Zoidiano0 - 11-04-2016
vintagewaffle Wrote:So just as an update, I currently have the pine64 lcd working with touch under armbian.i'm really interest ton have an armbian working with the touch panel please post the steps
Everything is out there and supported, it just needs to all come together.
I'm still fiddling with still having hdmi enabled and to either have the lcd automatically detected, or a simple switch to enable it before I have anything that could be included in a build.
I will try to update with the actual steps I used if anyone is interested.
or the documentation D:
thanks!
RE: Touch screen support - vaclav.vozar@seznam.cz - 11-22-2016
(10-26-2016, 09:55 AM)vintagewaffle Wrote: So just as an update, I currently have the pine64 lcd working with touch under armbian.
Everything is out there and supported, it just needs to all come together.
I'm still fiddling with still having hdmi enabled and to either have the lcd automatically detected, or a simple switch to enable it before I have anything that could be included in a build.
I will try to update with the actual steps I used if anyone is interested.
I am interested in to ... thanks for any info.
RE: Touch screen support - Luke - 12-07-2016
pfeerick is putting together a comprehensive thread concerning using the LCD on Linux here. Once completed, I will lock this thread and redirect queries to prevent multiple instances of same discussion.