PINE64
Phone will not turn on (but sometimes will) - Printable Version

+- PINE64 (https://forum.pine64.org)
+-- Forum: PinePhone (https://forum.pine64.org/forumdisplay.php?fid=120)
+--- Forum: PinePhone Hardware (https://forum.pine64.org/forumdisplay.php?fid=122)
+--- Thread: Phone will not turn on (but sometimes will) (/showthread.php?tid=17154)

Pages: 1 2


RE: Phone will not turn on (but sometimes will) - spha - 08-18-2023

(08-29-2022, 08:05 AM)insidetrip101 Wrote: I got the serial console and I'm getting this message with the jump drive image:

U-Boot SPL 2020.07 (Sep 03 2020 - 08:54:11 +0000)
DRAM: 0 MiB
### ERROR ### Please RESET the board ###


If I use a different image all that changes is the date of the U-Boot (which I assume is its compile time?).
I've posted this on the irc, and the guys I spoke with there think that ram is bad. They suggested trying to flash a different U-boot, but that didn't work (since the jumpdrive u-boot doesn't work that doesn't surprise me).

I don't have much hope in anyone being able to help. I just want to cover all my bases before I buy a new board. I just want to make sure that this is definitely not fixable.

I have a similar problem. Does the jumpdrive start? When connected to a PC, can you see that the jumpdrive is working?