Tow-Boot, a new U-Boot option for Pinephone Pro and other devices - Printable Version +- PINE64 (https://forum.pine64.org) +-- Forum: PinePhone Pro (https://forum.pine64.org/forumdisplay.php?fid=177) +--- Forum: PinePhone Pro Software (https://forum.pine64.org/forumdisplay.php?fid=179) +--- Thread: Tow-Boot, a new U-Boot option for Pinephone Pro and other devices (/showthread.php?tid=15998) |
RE: Tow-Boot, a new U-Boot option for Pinephone Pro and other devices - lllsondowlll - 02-11-2022 (02-11-2022, 07:50 AM)brb78 Wrote:(02-07-2022, 09:56 PM)lllsondowlll Wrote: EDIT: And Tow-Boot has single handedly fixed suspend and wake from suspend on PinePhone Pro. This feels like Christmas, no more dead battery after a couple of hours. Gives it like 3-4 extra hours with the phone asleep. Only Arch and Mobian seem to work with suspend. Manjaro not quite there yet unfortunately as it fails to wake still. RE: Tow-Boot, a new U-Boot option for Pinephone Pro and other devices - xnopasaranx - 02-14-2022 Wow, this has pretty much fixed my suspend/wake problems! Have been running this bootloader for 4 days as of now and I think it's stable enough. I wonder what is missing for them to make a proper release? EDIT: I also have sound issues after waking up the ppp (no sound on calls, sampling rate misconfigured). Don't think this is related to tow-boot though. RE: Tow-Boot, a new U-Boot option for Pinephone Pro and other devices - brb78 - 02-15-2022 Does this/can this change the boot priority to sdcard-first? what about the forced boot-on-power situation that seems to result in a boot loop at 0% battery? does this make a dead phone JUST charge and not also try to boot as soon as a power source is connected? RE: Tow-Boot, a new U-Boot option for Pinephone Pro and other devices - dukla2000 - 02-15-2022 (02-15-2022, 08:55 AM)brb78 Wrote: Does this/can this change the boot priority to sdcard-first? No - the boot priority is set by Rockchip and is SPI, eMMC, SDcard (see here, there is no reason to expect the RK3399s is any different.) But Yes - if/when you have Tow-boot on the SPI, then Tow-boot is the first thing to boot (currently indicated by a red light on PPP). However Tow-boot ambition in life is to find an OS, it's default is the eMMC but if you are holding Volume Down then it will try the SDcard first. RE: Tow-Boot, a new U-Boot option for Pinephone Pro and other devices - talpa - 02-15-2022 (02-15-2022, 01:35 PM)dukla2000 Wrote:(02-15-2022, 08:55 AM)brb78 Wrote: Does this/can this change the boot priority to sdcard-first? Holding volume up for turning the phone into a usb mass storage device exposing the eMMC is also a nice addition. (even if it is quite slow) RE: Tow-Boot, a new U-Boot option for Pinephone Pro and other devices - u-kidjp - 02-16-2022 My PPP (Explore Edition) cannot boot spi-installer which installed into SD card. Should I wipe bootloader on eMMC ? RE: Tow-Boot, a new U-Boot option for Pinephone Pro and other devices - dukla2000 - 02-16-2022 (02-16-2022, 06:03 PM)u-kidjp Wrote: My PPP (Explore Edition) cannot boot spi-installer which installed into SD card. If you have the original factory (Manjaro) installation on eMMC then your SDcard has not been built correctly. The spi-installer.img will boot from SDcard, as per video in 1st post, if installed OK. RE: Tow-Boot, a new U-Boot option for Pinephone Pro and other devices - lllsondowlll - 02-16-2022 Try holding volume down when booting phone to get into the installer. The installer itself uses Tow-boot to boot itself and vol down is boot from SD card. RE: Tow-Boot, a new U-Boot option for Pinephone Pro and other devices - xnopasaranx - 02-17-2022 this is a real nice piece of software! I have been using it for over a week now, right now I am using the mass storage mode to flash arch to emmc. RE: Tow-Boot, a new U-Boot option for Pinephone Pro and other devices - janjaapmeijer - 02-22-2022 (02-16-2022, 06:03 PM)u-kidjp Wrote: My PPP (Explore Edition) cannot boot spi-installer which installed into SD card. I think the Explorer Edition does not have SPI storage. Therefore I am not sure if this works yet, but maybe others can update me on that? |