+- PINE64 (https://forum.pine64.org)
+-- Forum: ROCKPRO64 (https://forum.pine64.org/forumdisplay.php?fid=98)
+--- Forum: RockPro64 Projects, Ideas and Tutorials (https://forum.pine64.org/forumdisplay.php?fid=104)
+--- Thread: SkiffOS server with Docker ,NAS, Home assistant, Jellyfin, Snikket XMPP (tutorial) (/showthread.php?tid=15944)
Pages:
1
2
RE: SkiffOS server with Docker ,NAS, Home assistant, Jellyfin, Snikket XMPP (tutorial) - GreyLinux - 04-01-2022
(04-01-2022, 04:14 AM)bavay Wrote:(04-01-2022, 04:07 AM)GreyLinux Wrote: sorry for the delayed reply work lately has been insane, I'm not sure why this is happening have you tried the udev rule with only one drive or none connected , just the Marvell Pcie connected ?
That's a good idea, I've not tried it yet, but I'll do it. So far, I've opened a bug report on the Marvell kernel driver bugzilla (see https://bugzilla.kernel.org/show_bug.cgi?id=215732). I'll comment more once I'll have tried with only one disk or even none connected to the adapter.
So after using grep on my dmesg output I do see this error, however it doesnt cause any issues with the drives. Do you have issues apart from the speeds , with accessing or writing to the drives ?
RE: SkiffOS server with Docker ,NAS, Home assistant, Jellyfin, Snikket XMPP (tutorial) - bavay - 04-04-2022
I've tried to start without any disks connected to the adapter and it behaves the same (same error message and stack trace).
Quote:Do you have issues apart from the speeds , with accessing or writing to the drives ?
No, the disks work fine (daily reads/writes, trim, smart reporting), I have not seen any weird behavior beside that the speed is lower than expected.
RE: SkiffOS server with Docker ,NAS, Home assistant, Jellyfin, Snikket XMPP (tutorial) - GreyLinux - 04-04-2022
(04-04-2022, 02:28 AM)bavay Wrote: I've tried to start without any disks connected to the adapter and it behaves the same (same error message and stack trace).
Quote:Do you have issues apart from the speeds , with accessing or writing to the drives ?
No, the disks work fine (daily reads/writes, trim, smart reporting), I have not seen any weird behavior beside that the speed is lower than expected.
Interesting , well hopefully your bug report will provide us with an answer to the error.
With regards to speeds I have closer to 310Mbps with the adapter ,this is with a crucial SSD, however I will be upgrading to a samsung EVO SSD tomorrow , I can report back with the speeds produced then.