+- PINE64 (https://forum.pine64.org)
+-- Forum: ROCK64 (https://forum.pine64.org/forumdisplay.php?fid=85)
+--- Forum: General Discussion on ROCK64 (https://forum.pine64.org/forumdisplay.php?fid=86)
+--- Thread: Hardware issues with Rock64 (/showthread.php?tid=13231)
Pages:
1
2
RE: Hardware issues with Rock64 - t4_4t - 04-08-2021
I don't usually use "Armbian" so I'm not familiar with this distribution.
But, you referred to "Armbian" as a concrete example.
So I decided to list the results I confirmed about "Armbian" that below.
The result is as follows.
Armbian: 2020-09-03 -> Now version
Code:
o U-Boot:bsp(maybe) Armbian_↑↑ (More older version)
o U-Boot:bsp Armbian_20.08.1_Rock64_focal_current_5.8.6.img.xz (2020-09-03)
cpuid#=55524b503039303036000000000xxxxx
x U-Boot:main_line Armbian_20.11_Rock64_focal_current_5.9.10.img.xz (2020-11-25)
x U-Boot:main_line Armbian_20.11.3_Rock64_focal_current_5.9.14.img.xz (2020-12-12)
x U-Boot:main_line Armbian_20.11.6_Rock64_focal_current_5.9.14.img.xz (2021-01-05)
x U-Boot:main_line Armbian_20.11.10_Rock64_focal_current_5.9.14.img.xz (2021-01-25)
cpuid#=00000000000000000000000000000000
o U-Boot:main_line Armbian_21.02.1_Rock64_focal_current_5.10.12.img.xz (2021-02-04)
o U-Boot:main_line Armbian_21.02.3_Rock64_focal_current_5.10.21.img.xz (2021-03-09)
cpuid#=55524b503039303036000000000xxxxxDebian: 20210408-02:17/netboot/SD-card-images
Code:
U-Boot TPL 2021.01+dfsg-4 (Mar 12 2021 - 23:00:43)
LPDDR3, 800MHz
BW=32 Col=11 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=4096MB
Trying to boot from BOOTROM
Returning to boot ROM...
U-Boot SPL 2021.01+dfsg-4 (Mar 12 2021 - 23:00:43 +0000)
Trying to boot from MMC1
NOTICE: BL31: v2.4(debug):
NOTICE: BL31: Built : 01:29:49, Jan 17 2021
NOTICE: BL31:Rockchip release version: v1.2
INFO: ARM GICv2 driver initialized
INFO: plat_rockchip_pmu_init: pd status 0xe
INFO: BL31: Initializing runtime services
INFO: BL31: cortex_a53: CPU workaround for 855873 was applied
WARNING: BL31: cortex_a53: CPU workaround for 1530924 was missing!
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x200000
INFO: SPSR = 0x3c9
U-Boot 2021.01+dfsg-4 (Mar 12 2021 - 23:00:43 +0000)
Model: Pine64 Rock64
DRAM: 4 GiB
PMIC: RK8050 (on=0x50, off=0x10)
MMC: mmc@ff500000: 1, mmc@ff520000: 0
Loading Environment from MMC... *** Warning - bad CRC, using default environment
In: serial@ff130000
Out: serial@ff130000
Err: serial@ff130000
Model: Pine64 Rock64
Net: eth0: ethernet@ff540000
Hit any key to stop autoboot: 0
=> printenv cpuid#
cpuid#=4054f3fc000000003cabf5fe00000000
# xxd /sys/bus/nvmem/devices/rockchip-efuse0/nvmem
00000000: 0000 0000 0000 0000 0000 0000 0000 0000 ................
00000010: 0000 0000 0000 0000 0000 0000 0000 0000 ................----
I'm not an English speaking person.
Therefore, my English ability cannot accurately understand the following content that you insist.
So I have nothing to comment on.
> However this also shows the heart of the problem here:
> ...
> ... "the wrong fork" or an actual hardware problem.