• USB-C Dock / Unable to unlock the phone :  this afternoon, I'm using the Pinephone as as monitor to see some videos stream (not very well, jerky), so I use the USB-C Dock and an Ethernet connection. Before to go to a shop, I've removed the connection and verify that the phone is always working. To make the test, I've called my Pinephone. After few rings, I stop the call to the Pinephone. The last application opened and not close is the 'Call' application. From this time, my Pinephone is locked, I can unlock it, the screen is completely unresponsive for some hours. I put the USB-C Dock again and I can unlock the Pinephone with my USB keyboard connected to the dock, for this I type the code to unlock the phone, but the screen is not responsive. After a reboot without the USB-C dock the screen is responsive and I can unlock the Pinephone.
  

• Calls : now when I call my phone, it's ringing, but I must push the power button to see the Call's screen and push the blue button to take the line.
  

• Calls : I've missed a call, but good news, the contact's name was displayed in the list of calls   But, It is not possible to callback the person when I tape on the icon of the phone. When I close the Call application and reopen it, I see the contact's phone number first, after an instant, the names are displayed. Now if a close and open the Call application, the names are seen 
  

• Callls : just now, a friend call me, the contact is displayed with his name (not the phone number  ) and I try to push the blue button : impossible to take the line. The tone change, become faster and continue. I close the Call application but the sound continue. When I launch the Call application, I can't respond to the call. At this moment I have the USB-C dock station connected with keyboard, mouse and screen. I've disconnected the USB-C dock, nothing change. To stop the sound, I've rebooted the smartphone. The problem is not new for me but I was difficult to report here before with confidence on the details.
  

(02-15-2021, 11:30 AM)Gribouille Wrote: This morning it's not a good day 

In an other thread : https://forum.pine64.org/showthread.php?tid=13114&pid=89766#pid89766

Now, I see my Pinephone that has decided to make a power-off alone !

I've put the USB-C power cable, the led is green and nothing.  I remove the connector, the led stay green. Few seconds on the power button, the led is shutoff.  New action on the power button and I see ... "Mobian".

I've seen that the power level was low and indicated in red before that the Pinephone make a shutdown. Less than three hours ago, the level was more than 30 % (it was a minimum value) because I've plug on the phone roughly all the day.
Why the phone consume so energy now  

• Notifications : The notifications seems frequently changed to 'silent mode', even if I set it in the parameters panel. More confusing, in silent mode, when the phone receive a call, the vibration is continue. In one case, I can't stop it even in closing all applications, a reboot solved the problem. But I confirm after a reboot, the silent is set to 'off' and notification is set to 'Sound and vibration', but I have only a very long vibration.
  
• 'click' makes the camera ? : After a reboot, I can ear a series of  'click-click', without unlock the phone. When I use the camera and I switch between the front and the rear camera, it's the same sound.
  

(02-16-2021, 11:07 AM)Gribouille Wrote: "apt update && apt dist-upgrade && reboot" done this morining.

• Callls : just now, a friend call me, the contact is displayed with his name (not the phone number  ) and I try to push the blue button : impossible to take the line. The tone change, become faster and continue. I close the Call application but the sound continue. When I launch the Call application, I can't respond to the call. At this moment I have the USB-C dock station connected with keyboard, mouse and screen. I've disconnected the USB-C dock, nothing change. To stop the sound, I've rebooted the smartphone. The problem is not new for me but I was difficult to report here before with confidence on the details.
  

   

(03-22-2021, 09:39 AM)Gribouille Wrote: I've reinstalled my PinePhone with the last image of the Debian installer to have a encrypted system : it'works well   But the PinePhone take 2 minutes to boot    It's not a problem, a Debian computer is never stopped 

Yesterday, Sunday 21, I've made "apt update && apt dist-upgrade" and get an error as you can see on the picture.

The message is it normal ? Can I reboot without loosing my installations ?

Thank you in advance for your help.