+- PINE64 (https://forum.pine64.org)
+-- Forum: PINE A64(+) (https://forum.pine64.org/forumdisplay.php?fid=4)
+--- Forum: Linux on Pine A64(+) (https://forum.pine64.org/forumdisplay.php?fid=6)
+---- Forum: Debian (https://forum.pine64.org/forumdisplay.php?fid=24)
+---- Thread: (ARCHIVED) Debian Jessie Images (3.10.102 BSP Kernel) New Release (/showthread.php?tid=497)
RE: Debian Jessie Images (3.10.102 BSP Kernel) New Release - dkryder - 07-02-2016
gparted is included and if the script did not work gparted will fix it.
RE: Debian Jessie Images (3.10.102 BSP Kernel) New Release - Jsturgis - 07-02-2016
Is anyone else having no aufio through HDMI on this latest image? when I go to sound setup and test speakers through audio hardware Im getting nothing
RE: Debian Jessie Images (3.10.102 BSP Kernel) New Release - janeku - 07-02-2016
(07-01-2016, 11:45 PM)lenny.raposo-pine64.pro Wrote: it's quite alright to run it again.
sudo -i
resize_rootfs.sh
reboot
then do the follwing
df -h
and send me the output aswell as the details on the card size you have in use
Here is Output of df -h. Used card is 32GB size.
debian@pine64:~$ df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mmcblk0p2 7.0G 4.4G 2.3G 66% /
devtmpfs 458M 0 458M 0% /dev
tmpfs 491M 156K 490M 1% /dev/shm
tmpfs 491M 7.0M 484M 2% /run
tmpfs 5.0M 4.0K 5.0M 1% /run/lock
tmpfs 491M 0 491M 0% /sys/fs/cgroup
/dev/mmcblk0p1 50M 13M 38M 25% /boot
tmpfs 99M 4.0K 99M 1% /run/user/119
tmpfs 99M 24K 99M 1% /run/user/1000
/dev/sda1 3.8G 2.2M 3.8G 1% /media/debian/UUI
And here is output of resize script:
+ DEVICE=/dev/mmcblk0
+ PART=2
+ resize
+ fdisk -l /dev/mmcblk0
+ grep /dev/mmcblk0p2
+ awk {print $2}
+ start=143360
+ echo 143360
143360
+ set +e
+ fdisk /dev/mmcblk0
Welcome to fdisk (util-linux 2.25.2).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Command (m for help): Disk /dev/mmcblk0: 29 GiB, 31104958464 bytes, 60751872 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xa2427f8e
Device Boot Start End Sectors Size Id Type
/dev/mmcblk0p1 40960 143359 102400 50M e W95 FAT16 (LBA)
/dev/mmcblk0p2 143360 14884863 14741504 7G 83 Linux
Command (m for help): Partition number (1,2, default 2):
Partition 2 has been deleted.
Command (m for help): Partition type
p primary (1 primary, 0 extended, 3 free)
e extended (container for logical partitions)
Select (default p): Partition number (2-4, default 2): First sector (2048-60751871, default 2048): Last sector, +sectors or +size{K,M,G,T,P} (143360-60751871, default 60751871): Last sector, +sectors or +size{K,M,G,T,P} (143360-60751871, default 60751871):
Do you really want to quit? + set -e
+ partx -u /dev/mmcblk0
+ resize2fs /dev/mmcblk0p2
resize2fs 1.43 (17-May-2016)
The filesystem is already 1842688 (4k) blocks long. Nothing to do!
+ echo Done!
Done!
RE: Debian Jessie Images (3.10.102 BSP Kernel) New Release - MarkHaysHarris777 - 07-02-2016
mine was similar; only it left the card at 3G/ gparted does fix it; but I moved it to mint for the operation.
RE: Debian Jessie Images (3.10.102 BSP Kernel) New Release - janeku - 07-02-2016
How you assign unallocated space ? I have 2 partitions: 20MB and 21 GB.
RE: Debian Jessie Images (3.10.102 BSP Kernel) New Release - MarkHaysHarris777 - 07-02-2016
(07-02-2016, 08:44 AM)janeku Wrote: How you assign unallocated space ? I have 2 partitions: 20MB and 21 GB.
First sudo -i
next make sure the partitions are not mounted (I used my HP notebook running gnu+linux) but others have done this on the Pine with gparted there...
1) open the device with gparted
gparted /dev/mmcblk0
2) select the partition part2 you want to expand into unallocated space (click on it)
3) click the -->| button which will open the partition expander
4) drag the edge of the partition to the right to fill up the entire space
(it will show as a pending operation)
5) on one of the dropdown (edit maybe) you'll find an Apply function... click it
(the pending operation will apply)
6) close gparted
7) boot your image and check with the df command
marcus
RE: Debian Jessie Images (3.10.102 BSP Kernel) New Release - UnixOutlaw - 07-03-2016
I shutdown both my pine64+ machines - inserted the SD into my Ubuntu laptop then used gparted to resize the root partition - as resize_rootfs.sh did nothing on either of my pine64+'s...
16 GB and 64 GB SD cards...
issue with 2 ethernet lines - dkryder - 07-03-2016
hello,
i recently bought a usb hub with a rj45[ethernet] port also. the port is recognized and set up as a 2nd ethernet at boot if two cables are connected or during a session if the cable is connect. throughput is fine.my issue is if the ethernet line 1 [the one on the board] is not connected while the 2nd line is operational the animation for searching for ip address for cable 1 is continuous. i'm thinking that either there should be no anjimation since no cable is physically attached or the search and the animation should time out after a cerain period of time, 30 - 90 secs, as desired. are there any settings i should do? thanks.
RE: Debian Jessie Images (3.10.102 BSP Kernel) New Release - lenny.raposo-pine64.pro - 07-05-2016
It will go away after 5 minutes I believe
RE: Debian Jessie Images (3.10.102 BSP Kernel) New Release - pfeerick - 07-06-2016
(07-05-2016, 03:44 PM)lenny.raposo-pine64.pro Wrote: It will go away after 5 minutes I believe
Don't you mean "one more minute than you waited?" :-P Although I did also seem to think the timeout was shorter than than... but it has been a while since I started the pine64 with it needing to have a eth cable plugged in!