Play along - create a PinePhone keyboard

Play along - create a PinePhone keyboard - Printable Version

+- PINE64 (https://forum.pine64.org)
+-- Forum: PinePhone (https://forum.pine64.org/forumdisplay.php?fid=120)
+--- Forum: PinePhone Accessories (https://forum.pine64.org/forumdisplay.php?fid=123)
+--- Thread: Play along - create a PinePhone keyboard (/showthread.php?tid=10885)

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

RE: Play along - create a PinePhone keyboard - nas - 11-23-2020

(11-21-2020, 09:23 AM)ryo Wrote: Maybe like this?

A linux flip phone with a t9 keypad would be... interesting Big Grin

(11-22-2020, 12:01 AM)Jame5 Wrote: I have a design I'd like to submit, where should I submit it?

I like those large keys - a keyboard case doesn't have to strictly mirror the pinephone dimensions.

RE: Play along - create a PinePhone keyboard - deedend - 11-25-2020

(11-22-2020, 12:01 AM)Jame5 Wrote: I have a design I'd like to submit, where should I submit it?

Of your design, I really like the 360 degrees "yoga style" hinges mechanism. I think it can solve the usability issue as a phone.

RE: Play along - create a PinePhone keyboard - don570don570don570 - 11-26-2020

(11-23-2020, 04:28 PM)nas Wrote:
(11-21-2020, 09:23 AM)ryo Wrote: Maybe like this?

A linux flip phone with a t9 keypad would be... interesting

(11-22-2020, 12:01 AM)Jame5 Wrote: I have a design I'd like to submit, where should I submit it?

I made an animation using Blender . I didn't show the cable connection between the phone and the keyboard.

Animation Download
Image Download

RE: Play along - create a PinePhone keyboard - don570don570don570 - 11-26-2020

I created an animation based on James5 design

Animation Download

Image link

RE: Play along - create a PinePhone keyboard - don570don570don570 - 11-26-2020

Here is an animation based on james5 design

https://drive.google.com/file/d/1D4_7FyT7CS-BTwO_Yi-aZCeszhKJZfvB/view?usp=sharing
_______________________________________________

Image download

https://drive.google.com/file/d/1ACLuren-sbf82PCRnUpSSyIsAKhcmdtD/view?usp=sharing

RE: Play along - create a PinePhone keyboard - captainmorgan - 11-26-2020

(11-26-2020, 11:51 AM)don570don570don570 Wrote: Here is an animation based on james5 design

https://drive.google.com/file/d/1D4_7FyT7CS-BTwO_Yi-aZCeszhKJZfvB/view?usp=sharing
_______________________________________________

Image download

https://drive.google.com/file/d/1ACLuren-sbf82PCRnUpSSyIsAKhcmdtD/view?usp=sharing

It has the same problem as the original design, with that kind of keyboard you can no longer use the phone as a phone. As in a device you can hold comfortably against your ear to make a call.

RE: Play along - create a PinePhone keyboard - dallytaur - 11-26-2020

Has anyone muck around with this with a nice case it could also connect to the pongo pings I'm not a very good programmer so ill have no idea how to make an I2c driver for it.

[Image: 1f820800-90ab-4e48-aeb5-143599ad74f7.jpeg]

RE: Play along - create a PinePhone keyboard - nas - 11-27-2020

(11-26-2020, 08:30 PM)captainmorgan Wrote:
(11-26-2020, 11:51 AM)don570don570don570 Wrote: Here is an animation based on james5 design

It has the same problem as the original design, with that kind of keyboard you can no longer use the phone as a phone. As in a device you can hold comfortably against your ear to make a call.

I would like a pinetop design like the above but slimmer. Phone calls are a low priority for me.

RE: Play along - create a PinePhone keyboard - eFqLLnGo - 12-02-2020

I was surprised to see no mention of this project :

image : https://ibb.co/9b5ktLw
video link (5min21sec) : https://n-o-d-e.net/zeroterminal3.html

It's only on a pi zero so the pinephone would leave us with quite a bit more space for keys and such.

RE: Play along - create a PinePhone keyboard - mil - 12-02-2020

(11-26-2020, 09:40 PM)dallytaur Wrote: Has anyone muck around with this with a nice case it could also connect to the pongo pings I'm not a very good programmer so ill have no idea how to make an I2c driver for it.

I had actually had one of these M5Stack I2C keyboards onhand and tried interfacing the I2C pogo pins and all worked out great. Would be pretty simple to make the device driver as well - just havn't gotten around to it yet / want the case built out beforehand.

The keyboard itself is pretty much the perfect size to fit vertically on the pinephone (which I would prefer in anycase). I was thinking maybe doing something like a swivel / 180 degree mechanism so part of the screen is covered when using the keyboard and then rotate it back when not in use. Really using this thing would be more a matter of case design / 3D printing. Unfortunately, have lost my access to a 3D printer.

--

Also another potential is: https://www.tindie.com/products/arturo182/bb-q10-keyboard-pmod/ though these are a lot less readily available.