External DAC - Printable Version +- PINE64 (https://forum.pine64.org) +-- Forum: PINE A64(+) (https://forum.pine64.org/forumdisplay.php?fid=4) +--- Forum: Pine A64 Hardware, Accessories and POT (https://forum.pine64.org/forumdisplay.php?fid=32) +---- Forum: POT modules (https://forum.pine64.org/forumdisplay.php?fid=8) +---- Thread: External DAC (/showthread.php?tid=88) |
RE: External DAC - gkkpch - 11-06-2017 (11-06-2017, 07:53 AM)Luke Wrote:(11-06-2017, 07:33 AM)gkkpch Wrote: Sorry for testing your patience for such a long time, but finally got the release done for Pine64. That is my plan, but I won't be able to start that until the middle of January, too much work to finish before moving house. RE: External DAC - Luke - 11-06-2017 Completely understand! thank you once again - what a great release RE: External DAC - joe - 11-06-2017 I tested it TOSLINK (Coaxial) work not spdif ! And play music and webradio very small volume the music i only can use inside image Volumio space to copy paste my flac song , my usb 32bg stick can't find anything . other nas to find music not yet to test. ANALOG(DAC) L,R NOT WORK no sound ANALOG AUDIO OUT ( Headphone )WORK Thank , this is good start RE: External DAC - gkkpch - 11-07-2017 (11-06-2017, 09:27 PM)joe Wrote: I tested it TOSLINK Coaxial work ! Hey Joe, Go to the playback options and enable Volume Normalization, that should fix your webradio issue. Working coaxial/ toslink puzzles me, both give no peep here, on the other hand: I have no issues with RCA. Let's wait for some more feedback. Do you have a chance to test another simple i2s DAC? RE: External DAC - mat1 - 11-07-2017 Hello, thanks for your great work. I received my dac last week, with the new version of volumio it works perfectly. Mathias RE: External DAC - gkkpch - 11-07-2017 (11-07-2017, 01:29 AM)mat1 Wrote: Hello, Mathias, which option(s) are you using, toslink/coax/rca??? RE: External DAC - mat1 - 11-07-2017 (11-07-2017, 01:57 AM)gkkpch Wrote:(11-07-2017, 01:29 AM)mat1 Wrote: Hello, I use RCA. I tested with a litlle USB dac too (iBasso Dzero) and it works. RE: External DAC - joe - 11-07-2017 (11-07-2017, 01:08 AM)gkkpch Wrote:(11-06-2017, 09:27 PM)joe Wrote: I tested it TOSLINK Coaxial work ! @ gkkpch Thank your support enable volume normalization fixed it the sound volume is ok now . And first i haven't peep the coaxial is work or not because i tested many times RAC not work ( for me ) , so i test other . Unfortunately i haven't another i2s DAC And this pine64 audio board have jumper , do i need to set ? @ Luke Have you try the RAC is work ? RE: External DAC - Luke - 11-07-2017 (11-07-2017, 03:46 AM)joe Wrote:(11-07-2017, 01:08 AM)gkkpch Wrote:(11-06-2017, 09:27 PM)joe Wrote: I tested it TOSLINK Coaxial work ! Hey Joe, I am away from home until the end of the week - will check on Monday and report back : But it looks like others have gotten it to work and if Ge says it works then it must work RE: External DAC - gkkpch - 11-07-2017 (11-07-2017, 05:23 AM)Luke Wrote:(11-07-2017, 03:46 AM)joe Wrote:(11-07-2017, 01:08 AM)gkkpch Wrote:(11-06-2017, 09:27 PM)joe Wrote: I tested it TOSLINK Coaxial work ! @ Joe, check that you have a jumper set to MCLK (not 50M!!) and the other to I2S. @ Luke: "quick" try with sopine after changing the bootloader and u-boot: boot from SD is perfect! Everthing works, also with the DAC, all the same as Pine64 plus. But no luck with eMMC yet, it locates u-boot ok, but can't load it. Soon as I have some time in between, I'll try a community image first. When SD is ok, then there can't be much work left for eMMC. Do you have an LTS or soPine to try a dev image for me next week? -- Gé -- |