+- PINE64 (https://forum.pine64.org)
+-- Forum: Quartz64 (https://forum.pine64.org/forumdisplay.php?fid=166)
+--- Forum: Linux on Quartz64 (https://forum.pine64.org/forumdisplay.php?fid=168)
+--- Thread: Armbian and LibreELEC and AltLinux for Quartz64 (/showthread.php?tid=16312)
RE: Armbian and LibreELEC and AltLinux for Quartz64 - balbes150 - 07-05-2023
for Quartz64-A , Quartz64-B , SOQuartz + SOQuartz Model-A Baseboard
Libreelec 20230704 kermel 6.4.1 KODI-21
ArmbianTV 20230704 kernel current 6.3.11 and edge 6.4.1
Altlinux 20230704 kernel 6.3.11
RE: Armbian and LibreELEC and AltLinux for Quartz64 - polrus - 07-20-2023
It seems like https://users.armbian.com/balbes150/soquartz/ is not a valid link anymore.
Are you able to re-upload it?
RE: Armbian and LibreELEC and AltLinux for Quartz64 - balbes150 - 07-20-2023
all image SOQuartz
https://disk.yandex.ru/d/Oq5yvBkuIK4R3A
RE: Armbian and LibreELEC and AltLinux for Quartz64 - balbes150 - 07-21-2023
ArmbianTV 20230713 kernel current 6.3.13 and edge 6.4.3
Altlinux kernel 6.4.3
RE: Armbian and LibreELEC and AltLinux for Quartz64 - anwe - 08-01-2023
Thank you for the excellent work @balbes150 !
Are you still interested in a UART log from a non-UEFI Armbian image on an 8 GB Quartz64 A?
I noticed you've posted about fixing the RAM issue, but I just wanted to check, maybe that only applied to the EDK 2 images.
I installed an EDK 2 image yesterday (slightly older one from May, didn't notice you had images from July until now).
Works like a charm so far, I put Home Assistant Core on it, migrated my old config, and it just works.
(I tried the "official" CSC image on the armbian download page first just to check, and that only reported 2 GB, but also froze hard a few minutes after boot, no heartbeat, no kernel panic AFAICT, just froze.)
Let me know if you want me to test other stuff as well, and I'll see what I can do.
(DIY NAS and router builds in the works, so I have a small pile of noname i210 nics and a SATA 4-port (marvell IIRC) board just waiting to be plugged in.)
RE: Armbian and LibreELEC and AltLinux for Quartz64 - balbes150 - 08-01-2023
(08-01-2023, 07:06 AM)anwe Wrote: Are you still interested in a UART log from a non-UEFI Armbian image on an 8 GB Quartz64 A?
I noticed you've posted about fixing the RAM issue, but I just wanted to check, maybe that only applied to the EDK 2 images.
Let me know if you want me to test other stuff as well, and I'll see what I can do.
(DIY NAS and router builds in the works, so I have a small pile of noname i210 nics and a SATA 4-port (marvell IIRC) board just waiting to be plugged in.)
The memory size is fixed for all versions (u-boot and EDK2). It would be interesting to check out the different equipment that you have.
RE: Armbian and LibreELEC and AltLinux for Quartz64 - anwe - 08-01-2023
Ok, cool
The Home Assistant build (the only one more or less finished) isn't very interesting hardware-wise, it's just in the small aluminium case with a ConBee II USB stick hanging off it, booting from a 64 GB eMMC.
I can post some lspci output or so from the NICs/SATA cards when I get to the NAS build, but maybe that belongs in a different thread.
(The router is a RockPro64 and runs OpenWRT, so definitely off topic here.)
RE: Armbian and LibreELEC and AltLinux for Quartz64 - balbes150 - 09-07-2023
ArmbianTV 20230905 kernel current 6.4.14 and edge 6.5.1
RE: Armbian and LibreELEC and AltLinux for Quartz64 - balbes150 - 09-09-2023
Libreelec 20230906 kermel 6.4.15
RE: Armbian and LibreELEC and AltLinux for Quartz64 - balbes150 - 09-12-2023
Altlinux kernel 6.4.15