(ARCHIVED) Debian Jessie Images (3.10.102 BSP Kernel) New Release - Printable Version +- PINE64 (https://forum.pine64.org) +-- Forum: PINE A64(+) (https://forum.pine64.org/forumdisplay.php?fid=4) +--- Forum: Linux on Pine A64(+) (https://forum.pine64.org/forumdisplay.php?fid=6) +---- Forum: Debian (https://forum.pine64.org/forumdisplay.php?fid=24) +---- Thread: (ARCHIVED) Debian Jessie Images (3.10.102 BSP Kernel) New Release (/showthread.php?tid=497) |
RE: Debian Jessie Images (3.10.65 BSP Kernel) - frewind - 05-08-2016 (05-08-2016, 01:08 AM)tllim Wrote:(05-08-2016, 12:02 AM)lenny.raposo-pine64.pro Wrote: OK folks Mate and XFCE images are ready for download Excellent work as usual Lenny RE: Debian Jessie Images (3.10.65 BSP Kernel) - rahlquist - 05-08-2016 Ok so have your latest up an running. Is there any steps that need to be taken to optimize video playback? RE: Debian Jessie Images (3.10.65 BSP Kernel) - lenny.raposo-pine64.pro - 05-08-2016 you can use the mplayer script located in /usr/local/sbin for videos as for Kodi as mentioned before it works in windowed mode (simply hit "\" key) and go to settings>video>acceleration and use software render mode. It did the trick for me to watch streams in SD or at most 720p RE: Debian Jessie Images (3.10.65 BSP Kernel) - rahlquist - 05-08-2016 (05-08-2016, 10:28 PM)lenny.raposo-pine64.pro Wrote: you can use the mplayer script located in /usr/local/sbin Ty wasnt sure if anything changed and until today I had no way to see video on pine other than over xrdp. RE: Debian Jessie Images (3.10.65 BSP Kernel) - tkaiser - 05-09-2016 (05-08-2016, 10:04 PM)rahlquist Wrote: Ok so have your latest up an running. Is there any steps that need to be taken to optimize video playback? Obviously optimization was not the goal. Instead just another silly workaround (disable acceleration to heat up the CPU) instead of fixing the issue so Kodi makes use of Cedrus HW accelerated video decoding. RE: Debian Jessie Images (3.10.65 BSP Kernel) - Luke - 05-09-2016 Excellent work Lenny. RE: Debian Jessie Images (3.10.65 BSP Kernel) - Marvels - 05-10-2016 Hello all Sorry if this has been asked elsewhere but I've not seen it after having a quick look through the thread. I have an issue where my Ethernet is not picking up a DHCP address from my router. I have the Pine64+ 2GB and I'm using the latest software release. I've tried three different cables, 2x Cat 6 and 1x Cat 5e, two different routers, Netgear and Zyxel, two different SD cards, Sandisk and Samsung. The order in which I try to get connected is: Install Image Resize fs after first boot Reboot Plug in ethernet The IP that is being assigned is 169.192.32.54 which is an invalid address. I've run ifdown eth0 and ifup eth0 but during the up process it says it cannot find a DHCP address to assign. All of the equipment above works on both my Orange PI PC and my Ordroid C2. Am I missing something? Thanks RE: Debian Jessie Images (3.10.65 BSP Kernel) - lenny.raposo-pine64.pro - 05-10-2016 try editing the uEnv.txt 's mac address in /boot directory RE: Debian Jessie Images (3.10.65 BSP Kernel) - Marvels - 05-10-2016 (05-10-2016, 01:53 AM)lenny.raposo-pine64.pro Wrote: try editing the uEnv.txt 's mac address in /boot directory I shall have a look at this when I get home from work. Is there anything I need to set specifically or do I just make one up? RE: Debian Jessie Images (3.10.65 BSP Kernel) - lenny.raposo-pine64.pro - 05-10-2016 you can copy the one listed on your board or perhaps make one up |