Armbian and LibreELEC and AltLinux for Quartz64 - Printable Version +- PINE64 (https://forum.pine64.org) +-- Forum: Quartz64 (https://forum.pine64.org/forumdisplay.php?fid=166) +--- Forum: Linux on Quartz64 (https://forum.pine64.org/forumdisplay.php?fid=168) +--- Thread: Armbian and LibreELEC and AltLinux for Quartz64 (/showthread.php?tid=16312) |
RE: Armbian and LibreELEC and AltLinux for Quartz64 - balbes150 - 01-27-2023 I checked KD5+wayland, it works well. The interface is fast, there are no freezes on the video when moving the mouse cursor, as on x11. Glmark2 showed more than 400 units. test images from KDE5 on the site. RE: Armbian and LibreELEC and AltLinux for Quartz64 - balbes150 - 01-28-2023 Added EDK2-EFI support for Quartz64-B (directory with extension EDK2-EFI). As a system with DE, I recommend the KDE5+wayland version. The interface works without brakes. Glmark2 shows more than 370 units. In x11 mode, glmark2 shows 110-120 units. The installation works on eMMC Please note, this is a test system and there may be errors in its operation. RE: Armbian and LibreELEC and AltLinux for Quartz64 - balbes150 - 01-31-2023 LibreELEC version 20230131 kernel 6.1.8 Added LibreELEC support for Quartz64-B. RE: Armbian and LibreELEC and AltLinux for Quartz64 - balbes150 - 03-03-2023 Use overlays The order of use. # mkdir -p /sys/kernel/config/device-tree/overlays/tsys01 # cd <bin directory under DT-Overlays> # cat tsys01.dtbo > /sys/kernel/config/device-tree/overlays/tsys01/dtbo remove the dtbo feature: # rmdir /sys/kernel/config/device-tree/overlays/dtoverlay https://www.96boards.org/documentation/consumer/dragonboard/dragonboard410c/guides/dt-overlays.md.html#32-loading-overlays-via-configfs https://github.com/starfive-tech/VisionFive2#appendix-ii-using-dtb-overlay-dynamically Please note, I have not tested this functionality. RE: Armbian and LibreELEC and AltLinux for Quartz64 - balbes150 - 03-07-2023 Version 20230307 for Soquartz with support for u-boot extlinux.conf. Fixed a problem with the RAM size for models with 8GB of RAM, now all 8 GB are available. RE: Armbian and LibreELEC and AltLinux for Quartz64 - balbes150 - 03-08-2023 Version 20230307 with core 6.3-rc1 for Quartz64-A and Quartz64-B. Fixed problem with the definition of RAM, now the full amount of RAM 8 GB is correctly determined. Soquartz + gnome +glmark2-wayland showed more > 500 units RE: Armbian and LibreELEC and AltLinux for Quartz64 - balbes150 - 03-10-2023 Version 20230310 kernel 6.3-rc1. The launch from USB media has been restored. The Quartz64-A has two USB 2.0 ports (left, upper and lower). Quartz64-B - the upper USB-2.0 port works. RE: Armbian and LibreELEC and AltLinux for Quartz64 - balbes150 - 03-12-2023 Version 20230312 for Soquartz with core 6.3-rc1. Added support to the bootloader for direct launch from USB. All USB-A ports work. RE: Armbian and LibreELEC and AltLinux for Quartz64 - balbes150 - 03-14-2023 Altlinux 20230314 kernel 6.1.15 for Quartz64-A , Quartz64-B , SOQuartz + SOQuartz Model-A Baseboard Libreelec 20230314 kermel 6.1.18 for Quartz64-A , Quartz64-B , SOQuartz + SOQuartz Model-A Baseboard RE: Armbian and LibreELEC and AltLinux for Quartz64 - balbes150 - 04-04-2023 ArmbianTV 20230404 kernel current 6.2.9 and edge 6.3-rc5 for Quartz64-A , Quartz64-B , SOQuartz + SOQuartz Model-A Baseboard Altlinux 20230404 kernel 6.2.9 for Quartz64-A , Quartz64-B , SOQuartz + SOQuartz Model-A Baseboard Libreelec 20230404 kermel 6.2.9 for Quartz64-A , Quartz64-B , SOQuartz + SOQuartz Model-A Baseboard |