01-20-2020, 03:27 PM
01-22-2020, 09:00 AM
(01-20-2020, 03:27 PM)cybergrimes Wrote: [ -> ]I'm looking at ordering a rp64 with Roshambo case-- would the SSD cartridge accessory work with this release of Recalbox?Hi!
thanks!
It works with actual version 5.
Enviado desde mi ONEPLUS A6003 mediante Tapatalk
01-28-2020, 03:46 PM
Thank you for making this.
Would it be possible to get a verson that is updated to kodi 18.5 or above?
The reason I ask is that a bug fix for for kodi when using mysql was relased into verison 18.5.
Thank you.
02-16-2020, 12:00 PM
One question that comes to my mind, would it be possible to install APT on the system?
My goal is to better control the fan (based on temp), because on/off it's ok but while it's quite noisy when on. I know it can be lowered in /sys/class/hwmon/hwmon0/pwm1, but would be good to have it automated.
I don't think this will take too much CPU: https://forum.pine64.org/showthread.php?tid=6953
What do you think?
My goal is to better control the fan (based on temp), because on/off it's ok but while it's quite noisy when on. I know it can be lowered in /sys/class/hwmon/hwmon0/pwm1, but would be good to have it automated.
I don't think this will take too much CPU: https://forum.pine64.org/showthread.php?tid=6953
What do you think?
03-06-2020, 04:17 PM
Thanks for all your hard work man, can’t wait to try it out !
03-07-2020, 05:02 AM
I've seen the new retrobox 6.0 beta at https://github.com/mrfixit2001/recalbox-...p/releases
and I wonder which version to install on the RockPro64?
It shows two version which could be right (rk3399 based):
-hardrock
- pinebookpro
Hardrock is a cost down rockpro64 (no PCI & usb C),
while the pinebookpro also has a rockpro64 variant with additional laptop hardware.
I have a roshambo box, and like to use the harddisk later on, so that might hint to the pinebookpro image.
Regards Paul
and I wonder which version to install on the RockPro64?
It shows two version which could be right (rk3399 based):
-hardrock
- pinebookpro
Hardrock is a cost down rockpro64 (no PCI & usb C),
while the pinebookpro also has a rockpro64 variant with additional laptop hardware.
I have a roshambo box, and like to use the harddisk later on, so that might hint to the pinebookpro image.
Regards Paul
03-08-2020, 12:32 PM
(03-07-2020, 05:02 AM)pljanson Wrote: [ -> ]I've seen the new retrobox 6.0 beta at https://github.com/mrfixit2001/recalbox-...p/releases
and I wonder which version to install on the RockPro64?
It shows two version which could be right (rk3399 based):
-hardrock
- pinebookpro
Hardrock is a cost down rockpro64 (no PCI & usb C),
while the pinebookpro also has a rockpro64 variant with additional laptop hardware.
I have a roshambo box, and like to use the harddisk later on, so that might hint to the pinebookpro image.
Regards Paul
There should be a build specific to the Rockpro64 under assets on the link that you posted.
03-23-2020, 02:44 PM
Many thanks to Mrfixit since I know a ton of work has gone into this!
I am having a problem where after Recalbox has been idle for an hour or so, it loses the wifi connection. I have to go into Network Settings, turn Wifi off and then hit Close. Then I go back into the menu and turn it back on and it works again (or I can just reboot and it will automatically connect). My wifi signal is strong so I don't think that is the problem. Is there a Linux command that I can run that will force it to periodically check the connection and keep it alive or any other ideas for how to fix this? Thank you!
I am having a problem where after Recalbox has been idle for an hour or so, it loses the wifi connection. I have to go into Network Settings, turn Wifi off and then hit Close. Then I go back into the menu and turn it back on and it works again (or I can just reboot and it will automatically connect). My wifi signal is strong so I don't think that is the problem. Is there a Linux command that I can run that will force it to periodically check the connection and keep it alive or any other ideas for how to fix this? Thank you!
03-29-2020, 05:37 AM
(03-23-2020, 02:44 PM)km782 Wrote: [ -> ]Many thanks to Mrfixit since I know a ton of work has gone into this!Put it as an issue on his git and Maybe he can patch it in his next rc.
I am having a problem where after Recalbox has been idle for an hour or so, it loses the wifi connection. I have to go into Network Settings, turn Wifi off and then hit Close. Then I go back into the menu and turn it back on and it works again (or I can just reboot and it will automatically connect). My wifi signal is strong so I don't think that is the problem. Is there a Linux command that I can run that will force it to periodically check the connection and keep it alive or any other ideas for how to fix this? Thank you!
I hear on the grapevine that Mr.F is moving to Bacotera to help develop the Rockchip releases. I’m not sure if this is going to affect his work on Recalbox