PINE64

Full Version: slarm64 (unofficial slackware) ROCKPro64 RK3399 (aarch64)
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Pages: 1 2
support for slarm64 for rockpro64 development boards (aarch64 unofficial port slackware)
the system can be assembled as armhf and aarch64, assemblies are made under aarch64


links:
         site: fail.pp.ua
         forum: linuxquestions
         downloads: http://dl.fail.pp.ua/slackware/images/rockpro64/
         development: https://bitbucket.org/sndwvs/slackware_arm_build_kit


first release:
         slack-current-aarch64-miniroot_29Sep18-4.4.162-rockpro64-build-20181117.img.tar.xz
         slack-current-aarch64-miniroot_29Sep18-4.4.162-rockpro64-build-20181117.img.tar.xz.md5
         README.TXT
I installed os on my pro and would like to know how to connect to wifi

tried in supplicant
Code:
network={
   ssid="Your SSID Here"
   psk="YourPresharedKeyHere"
}


also variuos variations of
Code:
ip link set wlan0 up
    iwconfig wlan0 essid your_essid key your_key
It dettects wireless adaptor and if I iwcinfig does show  network availble but cant get it to connect its a WPA2

wpa_gui throws an error

also if posible is it posible to fix screen overscan?

looks nice just really not able to connect to wifi my ignorance is quite a fallback could you point me the way to connect to a wpa2 wireless network?
(11-27-2018, 03:24 PM)NightCrawler504 Wrote: [ -> ]I installed os on my pro and would like to know how to connect to wifi

tried in supplicant
Code:
network={
   ssid="Your SSID Here"
   psk="YourPresharedKeyHere"
}


also variuos variations of
Code:
ip link set wlan0 up
    iwconfig wlan0 essid your_essid key your_key
It dettects wireless adaptor and if I iwcinfig does show  network availble but cant get it to connect its a WPA2

wpa_gui throws an error

also if posible is it posible to fix screen overscan?

looks nice just really not able to connect to wifi my ignorance is quite a fallback could you point me the way to connect to a wpa2 wireless network?

1. in the file /etc/wpa_supplicant.conf register
Code:
network={
   ssid="Your SSID Here"
   psk="YourPresharedKeyHere"
}

2. in the /etc/rc.d/rc.inet1.conf file, uncomment the lines:
Code:
IFNAME[4]="wlan0"
USE_DHCP[4]="yes"
WLAN_WPA[4]="wpa_supplicant"

3. restart the /etc/rc.d/rc.inet1 service as:
Code:
/etc/rc.d/rc.inet1 restart
or
/etc/rc.d/rc.inet1 wlan0_up


Quote:also if posible is it posible to fix screen overscan?

it's not quite clear how this manifests itself, I pretend that I need in the settings of XFCE -> window manager (optional) -> effects -> enable effects
Added Slackware Aarch64 Miniroot (ROCKPro64) 20181126 on Wiki and PINE64 Installer.
Added Slackware Aarch64 XFCE (ROCKPro64) 20181126 on Wiki and PINE64 Installer.
Did the above throws me:

wlan0 information: 'Any ESSID'
Error for wireless request "Set Nickname" (8B1C) :
Set failed on device wlan0: operation not supported
Successfully initialized wpa_supplicant
ioctl[SIOCSIWENCODEEXT] : Invalid arguement
ioctl[SIOCSIWENCODEEXT] : Invalid arguement
Blablabla
Timed out
Dhcp exited
(11-28-2018, 05:27 PM)NightCrawler504 Wrote: [ -> ]Did the above throws me:

wlan0 information: 'Any ESSID'
Error for wireless request "Set Nickname" (8B1C) :
Set failed on device wlan0: operation not supported
Successfully initialized wpa_supplicant
ioctl[SIOCSIWENCODEEXT] : Invalid arguement
ioctl[SIOCSIWENCODEEXT] : Invalid arguement
Blablabla
Timed out
Dhcp exited
try the options with the driver (uncomment):
WLAN_WPADRIVER[4]="nl80211"
[quote pid='42819' dateline='1543450259']
WLAN_WPADRIVER[4]="nl80211"
[/quote]

Error persists have no idea what's wrong guess I'll just wait some one gets it right ask them to upload a suplicant and inet1 file, I'm using wpa2 on aes, tried 3 wireless USB adapters and its difficult to post and extract errors without internet since for some reason usb 3 port seems to not pick up wireless adapter nor USB memory card, thanks anyway looks like a solid project hope it becomes noob friendly Big Grin
there is an updated kernel, with sdio0 (wifi) enabled and pmic fixed

download kernel-*-rk3399-4.4.166-aarch64-1mara.txz

kernel update:

Code:
upgradepkg kernel-*-rk3399-4.4.166-aarch64-1mara.txz
Quick question... does the designware i2s audio driver (modprobe dw_hdmi_i2s_audio) work properly in that 4.4.166?
Because all ayufan kernels higher than 4.4.138 have serious HDMI/i2s audio issues, so I've been stuck at 4.4.138-1100 since I first got this board.
There's dmesg errors about "i2s: fail to clear" or something like that, haven't tried to solve it in a month+.
Then again, I actually thought that might have been because of ayufan's DTB and the frequencies in it.

Is someone able to confirm dw_hdmi_i2s_audio works ok?
Pages: 1 2