PINE64

I bought a Rock64 4GB and an eMMC.

I am unable to boot the board.

I have tried booting the the board repeatedly using the eMMC and 3 different SD cards (and I have tried removing the eMMC and putting the switch on)
I have downloaded every image both hf and 64 bit, some several times. I have tried burning the SD and eMMC in different ways - using your PINE installer, etcher, disk manager, I have used linux and windows to do this. I have checked MD5s for downloaded files where available (community downloads seem to be missing these)

I have encountered three outcomes:

1. Android boots and I can interact for maybe 20 seconds before the screen freezes I can't actually do anything in that time.
   
2. Linux boots and then throws an kernel exception dumping stack trace, sometimes I can ctrl-alt-del to reboot to the same, sometimes I can't. I can only ever do that once.
   
3. The 3 lights come on and nothing else happens.
   

I have tried 2 different power supplies.

If this was a PC I would be trying different memory as this reeks of memory corruption but of course I can't try that.

It feels like the board is at fault - am I missing something?

I've raised a ticket with Pine64.

Come meet me on the irc ( see address below ) and I'll help you live;

... the board might be bad;  however, I doubt it.  Let's talk live, there are some things I can have you check.

See you on IRC.

Sorry for disappearing from IRC, I fried my install on a the laptop I was on - I forgot it was using the SD card...
Anyway, tried script again but with different image, same result.

(08-20-2017, 02:33 AM)fontalamh Wrote: [ -> ]Sorry for disappearing from IRC, I fried my install on a the laptop I was on - I forgot it was using the SD card...
Anyway, tried script again but with different image, same result.

no worries;

You have a support ticket open;  pretty sure its a board issue;  I'll mention it to tllim too.