PINE64

Hi, I'm running mobian on a pinephone beta.
Today I tried to update my moden Firmware and followed this guide:

Code:
wget https://github.com/Biktorgj/pinephone_modem_sdk/releases/download/0.3.6/package.tar.gz

  # any other temporary directory name/place will do below

mkdir firmware

tar xvzf package.tar.gz -C firmware

cd firmware

sudo ./flashall

# took less than 30 seconds: last lines output was: "Finished, if everything went well, run fastboot reboot to restart the modem."

  # Do not reboot the modem before flashing the recommended DSP upgrade though)

wget https://github.com/Biktorgj/quectel_eg25_recovery/raw/EG25GGBR07A08M2G_01.003.01.003/update/NON-HLOS.ubi

  # you only need to flash the newer DSP blob once, not on every future upgrade...

sudo fastboot flash modem NON-HLOS.ubi

fastboot reboot

https://sspaeth.de/2021/08/flashing-the-...pinephone/
using the newest release of Biktorj's firmware.
the 'sudo ./flashall' command gave this output:

Code:
Sending AT+QFASTBOOT...

< waiting for any device >

                                                   FAILED (remote: 'unknown command')

fastboot: error: Command failed

Sending 'aboot' (486 KB)                           OKAY [  0.021s]

Writing 'aboot'                                    OKAY [  0.209s]

Finished. Total time: 0.241s

Rebooting                                          OKAY [  0.019s]

Finished. Total time: 0.069s

< waiting for any device >

                                                   OKAY [  0.002s]

Finished. Total time: 0.002s

Sending 'boot' (4562 KB)                           OKAY [  0.149s]

Writing 'boot'                                     OKAY [  1.493s]

Finished. Total time: 1.667s

Sending 'recovery' (4562 KB)                       OKAY [  0.161s]

Writing 'recovery'                                 OKAY [  1.474s]

Finished. Total time: 1.656s

Sending 'system' (11904 KB)                        OKAY [  0.451s]

Writing 'system'                                   OKAY [  5.467s]

Finished. Total time: 5.981s

Sending 'recoveryfs' (13568 KB)                    OKAY [  0.498s]

Writing 'recoveryfs'                               OKAY [  4.019s]

Finished. Total time: 4.566s

Rebooting                                          OKAY [  0.004s]

Finished. Total time: 0.054s

Done!

I'm not sure if the error in the output is critical, or what to do about it. I then tried the

Code:
sudo fastboot flash modem NON-HLOS.ubi

command, which is now showing <waiting for any device> for about an hour with no indication of progress.
Any suggestions?

loreson