PINE64

I flashed the image to an SD card (https://ci.ubports.com/job/rootfs/job/rootfs-pinephone/), but when I load the card into the phone it won't start up. I used balenaEtcher-1.5.113-x64 to flash to the card.

PostMarketOS works.

Any thoughts?

(12-30-2020, 03:31 AM)Pinoideae Wrote: [ -> ]I flashed the image to an SD card (https://ci.ubports.com/job/rootfs/job/rootfs-pinephone/), but when I load the card into the phone it won't start up. I used balenaEtcher-1.5.113-x64 to flash to the card.

PostMarketOS works.

Any thoughts?

That link says it's depeciated and it also says you should use the image on this page instead https://ci.ubports.com/job/rootfs/job/ro...stemimage/

(12-30-2020, 04:45 AM)evilbunny Wrote: [ -> ]

(12-30-2020, 03:31 AM)Pinoideae Wrote: [ -> ]I flashed the image to an SD card (https://ci.ubports.com/job/rootfs/job/rootfs-pinephone/), but when I load the card into the phone it won't start up. I used balenaEtcher-1.5.113-x64 to flash to the card.

PostMarketOS works.

Any thoughts?

That link says it's depeciated and it also says you should use the image on this page instead https://ci.ubports.com/job/rootfs/job/ro...stemimage/

Thanks, that worked. Sound is not working though?

...

No sound for me either. I'm hoping the next kernel update fixes it.

(01-04-2021, 01:52 PM)neil_swann80 Wrote: [ -> ]No sound for me either.  I'm hoping the next kernel update fixes it.

I am getting sound, but it is so low to hear very well

(01-06-2021, 06:59 PM)KNERD Wrote: [ -> ]

(01-04-2021, 01:52 PM)neil_swann80 Wrote: [ -> ]No sound for me either.  I'm hoping the next kernel update fixes it.

I am getting sound, but it is so low to hear very well

I imaged a new OS to SD card and the sound works, but it's very soft, too.

I'm trying to flash but when I boot I just get either a red light and no display or a Pine64 logo and it stays there (depending on if I hit power or plug in USB).
Does anyone else see this power-on issue? How long is initial boot?

Regarding the volume being too low, it could be related to https://gitlab.com/postmarketOS/pmaports/-/issues/926

(03-13-2021, 10:05 AM)bujiraso Wrote: [ -> ]I'm trying to flash but when I boot I just get either a red light and no display or a Pine64 logo and it stays there (depending on if I hit power or plug in USB).
Does anyone else see this power-on issue? How long is initial boot?

Regarding the volume being too low, it could be related to https://gitlab.com/postmarketOS/pmaports/-/issues/926

I would try using Etcher for the image.

Also after an update, the OS no longer can connect to the cell system of my provider. I know it is not hardware issue, as booting up Manjaro now connectsa to the provider. For a long time, I had an issue with manjaro connecting for a few seconds, then forever disconnecting.