PINE64
AMENDED: OpenBSD, GigE Adapters/Chipsets, and ROCK64 STEREO AUDIO DAC ADD-ON BOARD - Printable Version

+- PINE64 (https://forum.pine64.org)
+-- Forum: ROCK64 (https://forum.pine64.org/forumdisplay.php?fid=85)
+--- Forum: BSD on Rock64 (https://forum.pine64.org/forumdisplay.php?fid=106)
+--- Thread: AMENDED: OpenBSD, GigE Adapters/Chipsets, and ROCK64 STEREO AUDIO DAC ADD-ON BOARD (/showthread.php?tid=6360)



AMENDED: OpenBSD, GigE Adapters/Chipsets, and ROCK64 STEREO AUDIO DAC ADD-ON BOARD - jovval - 08-06-2018

I see that OpenBSD's man pages indicate compatibility with various GigE chipsets, but Asix AA88179 is not among them.

(1) Should an Asix AA88179 GigE with and/or without a 3-port USB 3.0 hub work on OpenBSD?
Amendment: man usb shows
axen(4)ASIX Electronics AX88179 10/100/Gigabit USB Ethernet device
so, my question is about both GigE and the hub working (well) together.

(2) Does the 100BT of the audio dac add-on card work on OpenBSD?
Amendment: From
10/100Mbps MegJack on Audio DAC POT board Datasheet - http://files.pine64.org/doc/rock64/DGKYD111B096GWA1D.pdf
I see ethernet as merely a feed-through from the board, but my original question remains.

(3) If unknown, shouldDoes the audio of the audio dac add-on card work on OpenBSD?

(4) That is, what driver does it use?

(5) And, worth a mention, does its audio work on OpenBSD?

(4) Can you specify other solutions involving USB 3.0 hubs with GigE?


RE: AMENDED: OpenBSD, GigE Adapters/Chipsets, and ROCK64 STEREO AUDIO DAC ADD-ON BOARD - krjdev - 08-07-2018

(2) Haven't tried that yet.

(3) The I2S device ES9023 from the Audio DAC board is currently not supported by OpenBSD. So it doesn't work.