+- PINE64 (https://forum.pine64.org)
+-- Forum: Pinebook (https://forum.pine64.org/forumdisplay.php?fid=76)
+--- Forum: Pinebook Hardware and Accessories (https://forum.pine64.org/forumdisplay.php?fid=80)
+--- Thread: emmc upgrade (/showthread.php?tid=5003)
emmc upgrade - Erik - 08-24-2017
Hi Guys,
This morning I swapped out the 16 Gb emmc module for a bigger 64Gb one. Opening the case was easy! After rebooting from a know working SD card I simply tried to run
/usr/local/sbin/pine_install_to_emmc.sh xenial-mate I get 'You should boot from SD card' ,which I did....
Any help how to continue would be appreciated. Do I need to partition the drive first? I the emmc drive broken? (I checked it is firmly inserted...)
Erik
RE: emmc upgrade - erchache2000 - 10-23-2017
(08-24-2017, 02:18 AM)Erik Wrote: Hi Guys,
This morning I swapped out the 16 Gb emmc module for a bigger 64Gb one. Opening the case was easy! After rebooting from a know working SD card I simply tried to run
/usr/local/sbin/pine_install_to_emmc.sh xenial-mate I get 'You should boot from SD card' ,which I did....
Any help how to continue would be appreciated. Do I need to partition the drive first? I the emmc drive broken? (I checked it is firmly inserted...)
Erik
1- boot stable version from sd card using pine installer.
2- sudo ./pine64_update_kernel.sh 0.7.19
sudo ./pine64_update_uboot.sh 0.7.19
sudo ./pine64_update_package.sh 0.7.19
3- reboot
4- pine64_install_to_emmc.sh xenial-mate 0.7.19