<![CDATA[PINE64 - Android on Quartz64]]>

<![CDATA[PINE64 - Android on Quartz64]]> https://forum.pine64.org/ Sat, 09 May 2026 06:29:08 +0000 MyBB <![CDATA[Android 12.1 Kernel 5.10 Quartz64-a]]> https://forum.pine64.org/showthread.php?tid=17681 Thu, 01 Dec 2022 18:31:42 +0000 shaggy013]]> https://forum.pine64.org/showthread.php?tid=17681
Android with the 5.10 kernel Smile

Googletv (from adt3 source)

rooted

multiple markets for apps

HDR, 4K etc etc...

Based on PixelPropsUtils, GamesProps will spoof the device needed to unlock the FPS of the following games:
* Free Fire - Spoof Asus ROG Phone 1 will unlock 90 FPS
* COD Mobile - Spoof Xperia 5 || will unlock 120 FPS (only on multiplayer mode)
* PUBG Mobile - Spoof OnePlus 8 Pro will unlock 90 FPS
* Wild Rift - Spoof OnePlus 8 Pro will unlock 120 FPS
* Cyber Hunter - Spoof OnePlus 8 Pro will unlock 90 FPS
* Fortnite - Spoof OnePlus 8 Pro will unlock 90 FPS

https://drive.google.com/file/d/12L2KvIo...share_link]]> <![CDATA[Android SDK Build.]]> https://forum.pine64.org/showthread.php?tid=17554 Thu, 03 Nov 2022 07:15:32 +0000 west0330]]> https://forum.pine64.org/showthread.php?tid=17554 I'm using a Quartz64 -A SBC and QUARTZ64_SDK_android11.tar.gz.

SDK link:
http://files.pine64.org/SDK/Quartz64/QUA...d11.tar.gz

These are the steps that I took:
$ source build/envsetup.sh
$ lunch
$ 26 (rk3566_rgo-userdebug)
$ ./build.sh -UCKAu

However, unlike the image in the link below, it does not boot.

Test pre-build image:
- Quartz64_model-A_20210604_stock_android11_emmcboot.img
- Quartz64_model-A_dd_20210604_stock_android11_emmcboot-16GB.img.gz

Is the content of the link the only way?
Or do you need another additional method?
Android SDK for RK3566 - PINE64]]> I'm using a Quartz64 -A SBC and QUARTZ64_SDK_android11.tar.gz.

SDK link:
http://files.pine64.org/SDK/Quartz64/QUA...d11.tar.gz

These are the steps that I took:
$ source build/envsetup.sh
$ lunch
$ 26 (rk3566_rgo-userdebug)
$ ./build.sh -UCKAu

However, unlike the image in the link below, it does not boot.

Test pre-build image:
- Quartz64_model-A_20210604_stock_android11_emmcboot.img
- Quartz64_model-A_dd_20210604_stock_android11_emmcboot-16GB.img.gz

Is the content of the link the only way?
Or do you need another additional method?
Android SDK for RK3566 - PINE64]]> <![CDATA[Android on SOQuartz]]> https://forum.pine64.org/showthread.php?tid=17402 Mon, 26 Sep 2022 17:29:37 +0000 alistson]]> https://forum.pine64.org/showthread.php?tid=17402 <![CDATA[Android 12 L Quartz64 and Quartz64pro]]> https://forum.pine64.org/showthread.php?tid=17024 Mon, 18 Jul 2022 19:11:06 +0000 shaggy013]]> https://forum.pine64.org/showthread.php?tid=17024
Android 12L for quartz64-a and quartzpro64

working
magisk installed
hdmi (4k ,hdr,hlg,dobly vison)

wifi
bluetooth
cec
lan
npu

for the Quartzpro64
https://drive.google.com/file/d/1zttd-9b...sp=sharing

for the Quartz64-a
https://drive.google.com/file/d/1Xg1dJOR...sp=sharing

to make a google account
add the redfin module with magisk

https://drive.google.com/file/d/16ThYgxH...sp=sharing

have fun]]>
Android 12L for quartz64-a and quartzpro64

working
magisk installed
hdmi (4k ,hdr,hlg,dobly vison)

wifi
bluetooth
cec
lan
npu

for the Quartzpro64
https://drive.google.com/file/d/1zttd-9b...sp=sharing

for the Quartz64-a
https://drive.google.com/file/d/1Xg1dJOR...sp=sharing

to make a google account
add the redfin module with magisk

https://drive.google.com/file/d/16ThYgxH...sp=sharing

have fun]]> <![CDATA[Android 11 ATV]]> https://forum.pine64.org/showthread.php?tid=16510 Sun, 17 Apr 2022 14:14:40 +0000 shaggy013]]> https://forum.pine64.org/showthread.php?tid=16510
gapps not fully working googleplay wont work yet apps can be added through uptodown app or usb etc

inspired by the builds of mo123 for other devices i am trying to make a ATV build for the Quartz64-a

only from google login issue it is working nice on my device
4K,HDR, wifi etc

some cooling is advised

gpt image wich you can flash on sd or emmc

dts used :
https://github.com/Shaggy013/diesel/blob...tz64-a.dts

android 11 source with rockchip sdk (just google )
added gapps https://github.com/opengapps/aosp_build

android box configs:
https://github.com/Shaggy013/diesel/blob...dConfig.mk
https://github.com/Shaggy013/diesel/blob...56x_box.mk

gpt image

https://drive.google.com/file/d/1tGIoHn4...sp=sharing

.jpg

deskbox.jpg (Size: 326.59 KB / Downloads: 678)
.jpg

about.jpg (Size: 322.97 KB / Downloads: 555) ]]>
gapps not fully working googleplay wont work yet apps can be added through uptodown app or usb etc

inspired by the builds of mo123 for other devices i am trying to make a ATV build for the Quartz64-a

only from google login issue it is working nice on my device
4K,HDR, wifi etc

some cooling is advised

gpt image wich you can flash on sd or emmc

dts used :
https://github.com/Shaggy013/diesel/blob...tz64-a.dts

android 11 source with rockchip sdk (just google )
added gapps https://github.com/opengapps/aosp_build

android box configs:
https://github.com/Shaggy013/diesel/blob...dConfig.mk
https://github.com/Shaggy013/diesel/blob...56x_box.mk

gpt image

https://drive.google.com/file/d/1tGIoHn4...sp=sharing

.jpg

deskbox.jpg (Size: 326.59 KB / Downloads: 678)
.jpg

about.jpg (Size: 322.97 KB / Downloads: 555) ]]> <![CDATA[Android 11 4k HDR]]> https://forum.pine64.org/showthread.php?tid=16417 Fri, 01 Apr 2022 14:15:59 +0000 shaggy013]]> https://forum.pine64.org/showthread.php?tid=16417
build with a more recent sdk for android 11

working
HDMI
4k
HDR
lan , wifi
sata (first format it through usb )
usb
ir ?

Playstore works so you can udate and add programs it is a older playstore so sure it updates Smile

but it works to normal update android
like youtube kodi etc included
added leanback launcher to have a little box experiece with the tablet build .

todo

cec ( it works in a box build , but i have no gtsv to make playstore work)
and some cosmetics to make it look nice

this is a gpt image wich you can flash for example with etcher on a sd or emmc

https://drive.google.com/file/d/1PughXW8...sp=sharing

minimal 16gb sd/emmc

i wanted to clean it up some more but somehow my clock runaway from my board , so i cannot update it right away but thought i should at least share it]]>
build with a more recent sdk for android 11

working
HDMI
4k
HDR
lan , wifi
sata (first format it through usb )
usb
ir ?

Playstore works so you can udate and add programs it is a older playstore so sure it updates Smile

but it works to normal update android
like youtube kodi etc included
added leanback launcher to have a little box experiece with the tablet build .

todo

cec ( it works in a box build , but i have no gtsv to make playstore work)
and some cosmetics to make it look nice

this is a gpt image wich you can flash for example with etcher on a sd or emmc

https://drive.google.com/file/d/1PughXW8...sp=sharing

minimal 16gb sd/emmc

i wanted to clean it up some more but somehow my clock runaway from my board , so i cannot update it right away but thought i should at least share it]]> <![CDATA[Android 12 Tablet , Box/Atv]]> https://forum.pine64.org/showthread.php?tid=16136 Mon, 21 Feb 2022 16:08:49 +0000 shaggy013]]> https://forum.pine64.org/showthread.php?tid=16136 i saw that i got the android 12 rk sdk Smile

, so after removing the vendor and adding a quartz64 dts to the rk3566_s , got it compiling and to my surprise it is booting.

# SDK Version
PRODUCT_PROPERTY_OVERRIDES += \
ro.rksdk.version=ANDROID$(PLATFORM_VERSION)_RKR1

the test in the calculator works (same codes as in android 11 000.= and the 839...) , the videoplayer (not the mediaplayer) plays video , sound i dont know (no speakers Smile

) ,wifi works , bluetooth ?
and not much more it , i have no experience with building android , limo was the last time .

i only post a image wich you can flash with rkdevtool on a emmc !!!

NO POST OF SOURCES ( i dont know how public the source is ,proberly not (think a dev didn't got his setting in git right) compared to the custom linux sdk wich you can find public). and dont see a vendor with android 12 on their devices while there is a sdk for android12 since november last year .

i noticed the codecs are diffrent comapred to android 11 codecs .

so have fun whith the little custom preview Smile

https://drive.google.com/file/d/1uPbpYv4...sp=sharing]]> i saw that i got the android 12 rk sdk Smile

https://drive.google.com/file/d/1uPbpYv4...sp=sharing]]> <![CDATA[Android SDK download]]> https://forum.pine64.org/showthread.php?tid=15357 Fri, 19 Nov 2021 00:23:41 +0000 keaton]]> https://forum.pine64.org/showthread.php?tid=15357
also facing the same problem for the linux SDK....

is there a GIT hub for this?]]>
also facing the same problem for the linux SDK....

is there a GIT hub for this?]]> <![CDATA[Run From SD Card]]> https://forum.pine64.org/showthread.php?tid=15356 Thu, 18 Nov 2021 21:04:27 +0000 keaton]]> https://forum.pine64.org/showthread.php?tid=15356 how can I run from only the SD card? the images i found are eMMC only and I do not have one.
My goal is to get the CSI port up and running with my work products. I need the ability to send i2c commands via GPIO header to other devices that we manufacture.

end target of this is to show other tier1 manufactures our parts with a mock car head unit.

Currently downloading the android SDK from pine but it is slow to get. 233Kb/s]]> how can I run from only the SD card? the images i found are eMMC only and I do not have one.
My goal is to get the CSI port up and running with my work products. I need the ability to send i2c commands via GPIO header to other devices that we manufacture.

end target of this is to show other tier1 manufactures our parts with a mock car head unit.

Currently downloading the android SDK from pine but it is slow to get. 233Kb/s]]> <![CDATA[Can't compile Android 11 from SDK]]> https://forum.pine64.org/showthread.php?tid=15188 Tue, 26 Oct 2021 18:14:07 +0000 dieselnutjob]]> https://forum.pine64.org/showthread.php?tid=15188
These are the steps that I took:-

Download SDK from http://files.pine64.org/SDK/Quartz64/QUA...d11.tar.gz

Unpack it.

Code:
cd rk

source build/envsetup.sh

lunch   (selecting option 26/rk3566_rgo)

m -j4

The error I get is

Code:
ValueError: DTB image must not be empty

what am I doing wrong please?]]>
These are the steps that I took:-

Download SDK from http://files.pine64.org/SDK/Quartz64/QUA...d11.tar.gz

Unpack it.

Code:
cd rk

source build/envsetup.sh

lunch   (selecting option 26/rk3566_rgo)

m -j4

The error I get is

Code:
ValueError: DTB image must not be empty

what am I doing wrong please?]]> <![CDATA[ADB and USB A to A cable tips]]> https://forum.pine64.org/showthread.php?tid=15014 Sat, 02 Oct 2021 14:01:03 +0000 dieselnutjob]]> https://forum.pine64.org/showthread.php?tid=15014
Here are some tips that I think will help:-
I used an A to A USB cable from Amazon. It's just a straight through 4 way to 4 way A to A cable.
As you look at the USB ports on the Quartz64 it has to be the top right one (with black plastic tongue), above the USB 3 port (with blue plastic tongue).
I can only get it to work if the cable is connected from the Quartz64 to the laptop before booting up the board. I'm not yet 100% sure but I think that it has to be a cold boot, not a reboot.

Usefully if you do adb shell and get a Linux prompt on the Quartz64 from there you can run sudo and have root access.]]>
Here are some tips that I think will help:-
I used an A to A USB cable from Amazon. It's just a straight through 4 way to 4 way A to A cable.
As you look at the USB ports on the Quartz64 it has to be the top right one (with black plastic tongue), above the USB 3 port (with blue plastic tongue).
I can only get it to work if the cable is connected from the Quartz64 to the laptop before booting up the board. I'm not yet 100% sure but I think that it has to be a cold boot, not a reboot.

Usefully if you do adb shell and get a Linux prompt on the Quartz64 from there you can run sudo and have root access.]]> <![CDATA[RKDevTool]]> https://forum.pine64.org/showthread.php?tid=15012 Fri, 01 Oct 2021 21:02:23 +0000 dieselnutjob]]> https://forum.pine64.org/showthread.php?tid=15012 I haven't yet tried to write an image to eMMC with it. Doing this requires knowledge that I don't yet have.

I found that versions 4.x of Rockchip Driverassistant wouldn't work, but 5.1.1 does. Well either that or I made a mistake somewhere.

To run RKDevTool one needs to plug in a Windows laptop with an A to A USB cable, shut down the Quartz64, press the "recovery" button and whilst continuing to press it power on the Quartz64.

This will put the Quartz64 into "loader" mode.

In RKDevTool in Advanced Functions you can reset the Quartz64 (boot Android again) or go into Maskrom mode.

The ExportImage feature only works if Start + Count doesn't exceed 65536 and with Start=0 and Count=65536 it appears to dump out the first 32MB of the eMMC module.

I haven't played with the batch tool yet.

I don't suppose that these tools are that important with a Quartz64 unless you want to seal it up in a box making removal of the eMMC module difficult, but my objective is to learn more generally about the RK3566 at the moment.

I hope that this is useful to someone as it took me hours to figure it out.]]> I haven't yet tried to write an image to eMMC with it. Doing this requires knowledge that I don't yet have.

I found that versions 4.x of Rockchip Driverassistant wouldn't work, but 5.1.1 does. Well either that or I made a mistake somewhere.

To run RKDevTool one needs to plug in a Windows laptop with an A to A USB cable, shut down the Quartz64, press the "recovery" button and whilst continuing to press it power on the Quartz64.

This will put the Quartz64 into "loader" mode.

In RKDevTool in Advanced Functions you can reset the Quartz64 (boot Android again) or go into Maskrom mode.

The ExportImage feature only works if Start + Count doesn't exceed 65536 and with Start=0 and Count=65536 it appears to dump out the first 32MB of the eMMC module.

I haven't played with the batch tool yet.

I don't suppose that these tools are that important with a Quartz64 unless you want to seal it up in a box making removal of the eMMC module difficult, but my objective is to learn more generally about the RK3566 at the moment.

I hope that this is useful to someone as it took me hours to figure it out.]]> <![CDATA[I can't get adb to work]]> https://forum.pine64.org/showthread.php?tid=14977 Mon, 27 Sep 2021 22:21:12 +0000 dieselnutjob]]> https://forum.pine64.org/showthread.php?tid=14977 I have installed the 32GB Android image on my Quartz64.
I have enable "developer mode".
I have gone into Developer options and enabled "USB debugging".

I am trying to run adb on an Intel laptop running Manjaro.

I tested it with a Motorola phone and I can get adb to work on the phone.

I have connected to the Quartz64 using this cable https://www.amazon.co.uk/gp/product/B01KRO8D20
and I have tried all four USB ports on the Quartz64.

I can't think of anything else to try.

Can anyone help.

thanks]]> I have installed the 32GB Android image on my Quartz64.
I have enable "developer mode".
I have gone into Developer options and enabled "USB debugging".

I am trying to run adb on an Intel laptop running Manjaro.

I tested it with a Motorola phone and I can get adb to work on the phone.

I have connected to the Quartz64 using this cable https://www.amazon.co.uk/gp/product/B01KRO8D20
and I have tried all four USB ports on the Quartz64.

I can't think of anything else to try.

Can anyone help.

thanks]]>