https://forum.pine64.org/ Wed, 06 May 2026 12:18:18 +0000 MyBB https://forum.pine64.org/showthread.php?tid=18842 Sun, 05 Nov 2023 13:52:05 +0000 dorkydev]]> https://forum.pine64.org/showthread.php?tid=18842
What am I forgetting to do?

Still running just regular InfiniTime vrs 1.11.0 fosdem edition bootldr 1.0.0]]>
What am I forgetting to do?

Still running just regular InfiniTime vrs 1.11.0 fosdem edition bootldr 1.0.0]]> https://forum.pine64.org/showthread.php?tid=18637 Tue, 22 Aug 2023 16:42:03 +0000 KeX03]]> https://forum.pine64.org/showthread.php?tid=18637
I'm really new to the whole PineTime concept and I'm trying to get a heartrate reading which needs to be sent to a PC. I can figure out the Bluetooth connection but I don't have a starting point to get any values from the watch to a PC. Can anyone give me a hand or can lead me to a tutorial which can give me a first step in the right direction? The tutorials I've found so far are involving an old Github which won't work anymore.

Big thanks!]]>
I'm really new to the whole PineTime concept and I'm trying to get a heartrate reading which needs to be sent to a PC. I can figure out the Bluetooth connection but I don't have a starting point to get any values from the watch to a PC. Can anyone give me a hand or can lead me to a tutorial which can give me a first step in the right direction? The tutorials I've found so far are involving an old Github which won't work anymore.

Big thanks!]]> https://forum.pine64.org/showthread.php?tid=17782 Wed, 04 Jan 2023 19:28:17 +0000 raxxx]]> https://forum.pine64.org/showthread.php?tid=17782
I have a PineTime and want to set up more than one Alarm. I need a daily alarm to wake up but I need another one at the evening as a remeinder. Is there an option to set multiple alarms, maybe I am just blind and do not see in the menu?

If not I would try to change the menu to make more alarms possible and maybe also a "snooze" function for the alarm? I was looking at the development page and it looks quite complicated but I will try to read more about it.
In general it is a bautiful watch that covers everything I need, and it is light an tiny compared to my G-Shok with vibration Alarm

Greetings]]>
I have a PineTime and want to set up more than one Alarm. I need a daily alarm to wake up but I need another one at the evening as a remeinder. Is there an option to set multiple alarms, maybe I am just blind and do not see in the menu?

If not I would try to change the menu to make more alarms possible and maybe also a "snooze" function for the alarm? I was looking at the development page and it looks quite complicated but I will try to read more about it.
In general it is a bautiful watch that covers everything I need, and it is light an tiny compared to my G-Shok with vibration Alarm

Greetings]]> https://forum.pine64.org/showthread.php?tid=16431 Tue, 05 Apr 2022 14:58:17 +0000 ITCactus]]> https://forum.pine64.org/showthread.php?tid=16431 and you do not want to use transliteration option provided by the companion app (e.g. Gadgetbridge on android),
than you can search for the latest release on this page, download and install "pinetime-mcuboot-app-dfu-x.x.x.+.UA-PL.zip" like for regular InfiniTime update.

i'll try to maintain the support for that feature till the InfiniTime will support it natively,
or... till my PineTime will stop working preventing me from builds verification  ]]> and you do not want to use transliteration option provided by the companion app (e.g. Gadgetbridge on android),
than you can search for the latest release on this page, download and install "pinetime-mcuboot-app-dfu-x.x.x.+.UA-PL.zip" like for regular InfiniTime update.

i'll try to maintain the support for that feature till the InfiniTime will support it natively,
or... till my PineTime will stop working preventing me from builds verification  ]]> https://forum.pine64.org/showthread.php?tid=15782 Tue, 18 Jan 2022 17:34:43 +0000 pinemike]]> https://forum.pine64.org/showthread.php?tid=15782
I am struggling to connect to PineTime with NRFConnect / Gadgetbridge on both iphone and android phone -- none of the phones can detect the watch.
I have just received it and charged. There is no bluetooth icon on the watch face.
I cannot find any documentation saying how to turn on bluetooth on the watch (or is it permanently tuned on?)
All docs/tutorials say -- scan and connect but it does not seem discoverable and I could not find any troubleshooting guide.
The watch is running firmwave version 1.6.0 (f41aaad6).


  no_devices_found.jpeg (Size: 140.64 KB / Downloads: 628)

Could you please advise how I can connect to at least set the time?

Thanks,
Mike]]>
I am struggling to connect to PineTime with NRFConnect / Gadgetbridge on both iphone and android phone -- none of the phones can detect the watch.
I have just received it and charged. There is no bluetooth icon on the watch face.
I cannot find any documentation saying how to turn on bluetooth on the watch (or is it permanently tuned on?)
All docs/tutorials say -- scan and connect but it does not seem discoverable and I could not find any troubleshooting guide.
The watch is running firmwave version 1.6.0 (f41aaad6).


  no_devices_found.jpeg (Size: 140.64 KB / Downloads: 628)

Could you please advise how I can connect to at least set the time?

Thanks,
Mike]]> https://forum.pine64.org/showthread.php?tid=15609 Sun, 26 Dec 2021 04:11:36 +0000 Cmdr.Dillinger]]> https://forum.pine64.org/showthread.php?tid=15609 https://forum.pine64.org/showthread.php?tid=15378 Sun, 21 Nov 2021 12:50:02 +0000 ReleaseTheGeese]]> https://forum.pine64.org/showthread.php?tid=15378
I can adapt it to a forum post if you'd prefer, but it doesn't seem to be against the board rules (and that would take a while), so I hope you don't mind me linking.

Fine Times with the Pine Time (Thranpages)]]>
I can adapt it to a forum post if you'd prefer, but it doesn't seem to be against the board rules (and that would take a while), so I hope you don't mind me linking.

Fine Times with the Pine Time (Thranpages)]]> https://forum.pine64.org/showthread.php?tid=15167 Sat, 23 Oct 2021 18:37:24 +0000 H5c52]]> https://forum.pine64.org/showthread.php?tid=15167 I can't find much information or info online which details this problem.]]> I can't find much information or info online which details this problem.]]> https://forum.pine64.org/showthread.php?tid=14964 Sat, 25 Sep 2021 22:58:22 +0000 espenbo]]> https://forum.pine64.org/showthread.php?tid=14964
If you have a newer device with InfiniTime software pic thise as the device when you search for the pinetime. Don't pick the device named pinetime.


And If somebody knows hove to see and set the right date of birth It would be grate.
In the gui I can only see the days. Not the years or months.



harbour-amazfish.conf
dob=(\0\0\0\x10\0\0\0\0\0\0$\xe7\x88\x2\x93.\0\x1)


If somebody knows how to convert dates in the format used in the conf file. I think that could be a way to set the date and year rigth.

Espen

  Amazfish_date.png (Size: 26.24 KB / Downloads: 507) ]]>
If you have a newer device with InfiniTime software pic thise as the device when you search for the pinetime. Don't pick the device named pinetime.


And If somebody knows hove to see and set the right date of birth It would be grate.
In the gui I can only see the days. Not the years or months.



harbour-amazfish.conf
dob=(\0\0\0\x10\0\0\0\0\0\0$\xe7\x88\x2\x93.\0\x1)


If somebody knows how to convert dates in the format used in the conf file. I think that could be a way to set the date and year rigth.

Espen

  Amazfish_date.png (Size: 26.24 KB / Downloads: 507) ]]> https://forum.pine64.org/showthread.php?tid=14267 Thu, 24 Jun 2021 08:58:37 +0000 Mpoint]]> https://forum.pine64.org/showthread.php?tid=14267 https://pastebin.pl/view/9c6227a6So the first time (line7 was connected but now removed) still shows in the buffer of BLE
addrresses 
But when I run wasptool it breaks and  I am unable to use to to connect when I swap with another Pinetime. What is the correct procedure to perform a swap such that the wasptool will recognize the 2nd PineTime BLE address and connect to it rather than connecting to the one that is in the buffer of Raspberry Pi]]> https://pastebin.pl/view/9c6227a6So the first time (line7 was connected but now removed) still shows in the buffer of BLE
addrresses 
But when I run wasptool it breaks and  I am unable to use to to connect when I swap with another Pinetime. What is the correct procedure to perform a swap such that the wasptool will recognize the 2nd PineTime BLE address and connect to it rather than connecting to the one that is in the buffer of Raspberry Pi]]> https://forum.pine64.org/showthread.php?tid=14036 Mon, 31 May 2021 00:55:16 +0000 Peetz0r]]> https://forum.pine64.org/showthread.php?tid=14036
The short version: don't use reloader-factory.zip, use the zip from here instead.

This does not contain full InfiniTime, only the recovery. This arrangement is necessary due to the size, but also allows you to flash any future release of InfiniTime without having to find a new reloader zip. After flashing this reloader zip and letting the reloader finish, hold the button until the pinecone turns red to reboot into recovery, then flash the latest InfiniTime.

The long version with step-by-step instructions and pictures for switching in both directions is on the wiki: https://wiki.pine64.org/wiki/Switching_y...nd_Wasp-os]]>
The short version: don't use reloader-factory.zip, use the zip from here instead.

This does not contain full InfiniTime, only the recovery. This arrangement is necessary due to the size, but also allows you to flash any future release of InfiniTime without having to find a new reloader zip. After flashing this reloader zip and letting the reloader finish, hold the button until the pinecone turns red to reboot into recovery, then flash the latest InfiniTime.

The long version with step-by-step instructions and pictures for switching in both directions is on the wiki: https://wiki.pine64.org/wiki/Switching_y...nd_Wasp-os]]> https://forum.pine64.org/showthread.php?tid=13560 Mon, 05 Apr 2021 13:21:48 +0000 Mpoint]]> https://forum.pine64.org/showthread.php?tid=13560 https://stackoverflow.com/questions/1443...han-base64

Alternatively I am looking for HR and HRV App for PineTime
and Banglejs has one on github 
https://github.com/jabituyaben/Espruino-HRV]]> https://stackoverflow.com/questions/1443...han-base64

Alternatively I am looking for HR and HRV App for PineTime
and Banglejs has one on github 
https://github.com/jabituyaben/Espruino-HRV]]> https://forum.pine64.org/showthread.php?tid=13484 Wed, 24 Mar 2021 14:08:33 +0000 jojuma]]> https://forum.pine64.org/showthread.php?tid=13484
My PineTime is on v. 0.9.0. I wanted to do an update again and downloaded 0.14.1.
I'm using nRFConnect since for some reason I still can't get Gadgetbridge get to work (maybe my Android 8.1 is too old?).

After (successfully) connecting and bonding I select DFU Update and choose the ZIP from my filesystem. Then it says "initializing" and then... nothing...

As far as I can remember I did exactly the same thing when I upgraded from 0.7.x to 0.9.0.

I have no clue, what I'm doing wrong. Do you have any hints?

Thanks!]]>
My PineTime is on v. 0.9.0. I wanted to do an update again and downloaded 0.14.1.
I'm using nRFConnect since for some reason I still can't get Gadgetbridge get to work (maybe my Android 8.1 is too old?).

After (successfully) connecting and bonding I select DFU Update and choose the ZIP from my filesystem. Then it says "initializing" and then... nothing...

As far as I can remember I did exactly the same thing when I upgraded from 0.7.x to 0.9.0.

I have no clue, what I'm doing wrong. Do you have any hints?

Thanks!]]> https://forum.pine64.org/showthread.php?tid=13044 Mon, 08 Feb 2021 23:47:04 +0000 Msaulnier1]]> https://forum.pine64.org/showthread.php?tid=13044
I have just gone through most of your documentation and I am interested in working with micropython on my PineTime dev kit. However, I seem to be having some difficulty updating the firmware. I currently am using IOS nRF Connect and attempted to update the firmware on my Pinetime. I make a successful connection and upload the micropython.zip  the screen shows a firmware update and it says image loaded ok. At this time it resets and reboots. The PineTime logo shows and it looks like it did when I first opened the package. I have just received this PineTime in Jan 2021 It says the version is PineTime 0.7.1 I'm starting to wonder if I have one that still has the flash protection turned on. Looking forward to learning how to develop for this.]]>
I have just gone through most of your documentation and I am interested in working with micropython on my PineTime dev kit. However, I seem to be having some difficulty updating the firmware. I currently am using IOS nRF Connect and attempted to update the firmware on my Pinetime. I make a successful connection and upload the micropython.zip  the screen shows a firmware update and it says image loaded ok. At this time it resets and reboots. The PineTime logo shows and it looks like it did when I first opened the package. I have just received this PineTime in Jan 2021 It says the version is PineTime 0.7.1 I'm starting to wonder if I have one that still has the flash protection turned on. Looking forward to learning how to develop for this.]]> https://forum.pine64.org/showthread.php?tid=12183 Mon, 16 Nov 2020 19:41:09 +0000 jojuma]]> https://forum.pine64.org/showthread.php?tid=12183
I purchased a set with three PineTimes. They're really cool devices. Since I'm a bloody beginner, they actually do nothing more but show the time. I managed to set the time with "nRF Connect" app on an Android phone.

The november update now says "PineTime firmware can now be upgraded via Gadgetbridge!"

Would it be possible, to provide a step by step tutorial for people who are not deep into that? Or is there already one, someone could point me to?

Thanks!!!]]>
I purchased a set with three PineTimes. They're really cool devices. Since I'm a bloody beginner, they actually do nothing more but show the time. I managed to set the time with "nRF Connect" app on an Android phone.

The november update now says "PineTime firmware can now be upgraded via Gadgetbridge!"

Would it be possible, to provide a step by step tutorial for people who are not deep into that? Or is there already one, someone could point me to?

Thanks!!!]]>