sw4 jumper for disabling eMMC boot / multiboot
#1
Ran into the following: I wanted to connect a little switch to choose between sdcard and emmc boot.

Didn't work: Open was fine - eMMC booted.

But closed seemed to boot from eMMC, too, but the archlinux didn't come up and got stuck while looking for its root device.

After some fiddling around, trying and reading serial console I tried a _jumper_.

Worked. As described in the layout the jumper shortens the clock of the emmc to ground. Is it possible that already a 5cm wire has too much resistance to disable the eMMC?

And if so, is there a smarter way to multiboot?


Possibly Related Threads…
Thread Author Replies Views Last Post
  Can i use this Emmc for Rockpro 64 Supratec 2 560 12-20-2023, 09:12 AM
Last Post: wdt
  enble boot after power loss/restore dkebler 18 8,866 12-04-2023, 12:14 PM
Last Post: ok38
  Mainline U-Boot with SPI, NVMe and SATA boot support sigmaris 108 115,947 09-25-2023, 12:46 AM
Last Post: ChriChri
Bug Broken boot: What am I missing? mkosarek 1 596 09-08-2023, 08:14 AM
Last Post: wdt
  Unable to boot Armbian on new RockPro64 mooseball 5 4,047 07-14-2023, 08:59 AM
Last Post: rockjonn
  no boot white led flashing moserwi 7 4,055 05-18-2023, 10:46 AM
Last Post: wdt
  eMMC modules ajtravis 3 2,209 10-12-2022, 01:44 PM
Last Post: ajtravis
  u-boot locked on pine64pro ljones 1 1,461 09-06-2022, 10:32 AM
Last Post: ljones
  Cannot get my board to boot deutschlmao 11 7,768 09-05-2022, 04:23 PM
Last Post: ljones
  U-BOOT Tutorial hazz 0 1,095 07-19-2022, 10:48 PM
Last Post: hazz

Forum Jump:


Users browsing this thread: 1 Guest(s)