02-07-2020, 01:18 AM
And also no binary blobs from Rockchip and no slow boot because of big cores not initializing correctly.
Confirmed working booting from NVME and SD.
People who have written SPI before might have problems getting into maskrom mode but that will be covered in another post.
Confirmed working booting from NVME and SD.
People who have written SPI before might have problems getting into maskrom mode but that will be covered in another post.
Code:
U-Boot TPL 2020.01-00482-g3d3dbebfe8 (Feb 07 2020 - 00:49:56)
Channel 0: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
Channel 1: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
256B stride
256B stride
lpddr4_set_rate: change freq to 400000000 mhz 0, 1
lpddr4_set_rate: change freq to 800000000 mhz 1, 0
Trying to boot from BOOTROM
Returning to boot ROM...
U-Boot SPL 2020.01-00482-g3d3dbebfe8 (Feb 07 2020 - 00:49:56 +0100)
Trying to boot from SPI
U-Boot 2020.01-00482-g3d3dbebfe8 (Feb 07 2020 - 00:49:56 +0100)
Model: Pine64 Pinebook Pro
DRAM: 3.9 GiB
PMIC: RK808
MMC: dwmmc@fe320000: 1, sdhci@fe330000: 0
In: serial@ff1a0000
Out: serial@ff1a0000
Err: serial@ff1a0000
Model: Pine64 Pinebook Pro
## Error: Can't overwrite "serial#"
## Error inserting "serial#" variable, errno=1
rockchip_dnl_key_pressed: adc_channel_single_shot fail!
Net: No ethernet found.
Press q or Ctrl-C to interrupt autoboot
Card did not respond to voltage select!
PCIE-0: Link up (Bus0)
Device 0: Vendor: 0x1987 Rev: EDFM00E2 Prod: 2977079A0F1400255452
Type: Hard Disk
Capacity: 915715.3 MB = 894.2 GB (1875385008 x 512)
... is now current device
Scanning nvme 0:1...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
269 bytes read in 4 ms (65.4 KiB/s)
1: Manjaro
Retrieving file: /initramfs-dracut.img
17926524 bytes read in 41 ms (417 MiB/s)
Retrieving file: /Image
21029376 bytes read in 46 ms (436 MiB/s)
append: initrd=/initramfs-dracut.img console=tty1 rootwait rd.luks.uuid=99da2c1e-271d-48a6-9d10-768909d41380 root=UUID=6e05bd38-f565-4830-9dbd-492fd7d5d52c rootflags=noatime video=eDP-1:1920x1080@60
Retrieving file: /dtbs/rockchip/rk3399-pinebook-pro.dtb
81675 bytes read in 4 ms (19.5 MiB/s)
## Flattened Device Tree blob at 01f00000
Booting using the fdt blob at 0x1f00000
Loading Ramdisk to f4df9000, end f5f1197c ... OK
ERROR: reserving fdt memory region failed (addr=0 size=0)
Loading Device Tree to 00000000f4de2000, end 00000000f4df8f0a ... OK
Starting kernel ...