Touchpad, Keyboard, I2C oh my.

[resistanceisfutile]

Then, while only placing pressure with my fingers as close to the hinges as possible, I very carefully and slowly opened the hinges and turned the laptop over to it's normal operating position - with the probe wires sticking out in front of the unit.

After reassembly, the hinges appear fine. No apparent damage. Oh - don't forget about the two plastic retainer clips!

Thanks, That's what I wanted to know. I'll try and give it a shot Friday or Saturday

On second thought - I'm looking more closely at this to be 100% on it. The SH68F83 is on the main board, so it's possible? If so, then all of this probing craziness is unneeded.

That's a no. Page 20 shows SDA/SCL 19. Page 10 has the GPIOs. No connection between this i2c bus and the SoC.