Mainline U-Boot with SPI, NVMe and SATA boot support
#9
Oh, sorry. I add wrong log.

Code:
U-Boot TPL 2020.01-rc5-01969-g0bfd4738c6 (Jan 03 2020 - 15:46:36)              
Channel 0: LPDDR4, 50MHz                                                        
BW=32 Col=10 Bk=8 CS0 Row=15 CS=1 Die BW=16 Size=1024MB                        
Channel 1: LPDDR4, 50MHz                                                        
BW=32 Col=10 Bk=8 CS0 Row=15 CS=1 Die BW=16 Size=1024MB                        
256B stride                                                                    
256B stride                                                                    
lpddr4_set_rate: change freq to 400000000 mhz 0, 1                              
lpddr4_set_rate: change freq to 800000000 mhz 1, 0                              
Trying to boot from BOOTROM                                                    
Returning to boot ROM...                                                        
                                                                               
U-Boot SPL 2020.01-rc5-01969-g0bfd4738c6 (Jan 03 2020 - 15:46:36 +0000)        
Trying to boot from SPI                                                        
NOTICE:  BL31: v2.2(release):v2.2-277-gb1af2a51                                
NOTICE:  BL31: Built : 15:44:18, Jan  3 2020                                    
                                                                               
                                                                               
U-Boot 2020.01-rc5-01969-g0bfd4738c6 (Jan 03 2020 - 15:46:36 +0000)            
                                                                               
Model: Pine64 RockPro64                                                        
DRAM:  2 GiB                                                                    
PMIC:  RK808                                                                    
MMC:   dwmmc@fe320000: 1, sdhci@fe330000: 0                                    
Loading Environment from SPI Flash... SF: Detected gd25q128 with page size 256 B
*** Warning - bad CRC, using default environment                                
                                                                               
In:    serial@ff1a0000                                                          
Out:   serial@ff1a0000                                                          
Err:   serial@ff1a0000                                                          
Model: Pine64 RockPro64                                                        
rockchip_dnl_key_pressed: adc_channel_single_shot fail!                        
Net:   eth0: ethernet@fe300000                                                  
Hit any key to stop autoboot:  0                                                
Card did not respond to voltage select!                                        
Card did not respond to voltage select!                                        
                                                                               
Device 0: Vendor: 0x144d Rev: 1B2QEXE7 Prod: S466NX0K606125A                    
           Type: Hard Disk                                                    
           Capacity: 476940.0 MB = 465.7 GB (976773168 x 512)                  
... is now current device                                                      
Scanning nvme 0:7...                                                            
Found /boot/extlinux/extlinux.conf                                              
Retrieving file: /boot/extlinux/extlinux.conf                                  
2073 bytes read in 4 ms (505.9 KiB/s)                                          
select kernel                                                                  
1:      kernel-4.4.202-1237-rockchip-ayufan-gfd4492386213                      
2:      kernel-4.4.202-1237-rockchip-ayufan-gfd4492386213-memtest              
3:      kernel-4.4.197-1236-rockchip-ayufan-g30faab37e339                      
4:      kernel-4.4.197-1236-rockchip-ayufan-g30faab37e339-memtest  

Only USB3-Device what is booting from Kamils u-boot is my Samsung T5 SSD and my Corsair GTX USB3-Stick.

I have flashed u-boot to SPI.

What is booting?
  • PCIe NVMe SSD
  • SD-Card
What not?
  • eMMC
  • USB2 / USB3
Thanks for your work. When i can help testing, let me know.
Sorry for any mistakes. English is not my native language

1. Quartz64 Model B, 4GB RAM

2. Quartz64 Model A, 4GB RAM

3. RockPro64 v2.1

https://linux-nerds.org/
  Reply


Messages In This Thread
RE: Mainline U-Boot with SPI and NVMe support (alpha/pre-release version for testing) - by Bullet64 - 01-05-2020, 07:59 AM

Possibly Related Threads…
Thread Author Replies Views Last Post
  enble boot after power loss/restore dkebler 18 8,944 12-04-2023, 12:14 PM
Last Post: ok38
Bug Broken boot: What am I missing? mkosarek 1 607 09-08-2023, 08:14 AM
Last Post: wdt
  Unable to boot Armbian on new RockPro64 mooseball 5 4,086 07-14-2023, 08:59 AM
Last Post: rockjonn
  no boot white led flashing moserwi 7 4,108 05-18-2023, 10:46 AM
Last Post: wdt
  u-boot locked on pine64pro ljones 1 1,478 09-06-2022, 10:32 AM
Last Post: ljones
  Cannot get my board to boot deutschlmao 11 7,832 09-05-2022, 04:23 PM
Last Post: ljones
  U-BOOT Tutorial hazz 0 1,109 07-19-2022, 10:48 PM
Last Post: hazz
  Installation Debian on emmc: which U-Boot and where? vongillus 3 2,677 07-02-2022, 09:24 AM
Last Post: dkebler
  ROCKPRO64 PCI SSD SD-boot Install pspgarret 0 1,116 06-09-2022, 10:56 AM
Last Post: pspgarret
  Support says "regulator" on the SBC burned out; how to fix? dmos 0 873 06-02-2022, 02:20 AM
Last Post: dmos

Forum Jump:


Users browsing this thread: 4 Guest(s)