My PCIe disk controller works with Linux 5.3.6
#1
As said in the title, I have a disk controller LSI 9208 8i that needed some patch (pcie_rk_delay_bus_scan) to work with kernel Rockchip line 4.4 (the patch is in ayufan's kernel since april). I tried again the mainline and, finally, it works out of the box with the version 5.3.6. By the way, I have not tested Panfrost graphic driver, and I could not make framebuffer console to work.
  Reply
#2
I had problems with TCP conections from the Rockpro64 box with TVheadend to other computers with Kodi. Sometimes, the connection just stalled with a dumb conversation between peers like this:

PC: I confirm byte 12000 received (send me more).
Rockpro64: Take bytes 12001-15000.
PC: ...
Rockpro64: Take bytes 15001-18000.
PC: I confirm byte 12000 received (send me more).
Rockpro64:  Dodgy 

Perhaps the ethernet driver in Linux 5.3 is buggy and miscrafts some frames. I fixed it by disabling TCP checksum offload:

# ethtool -K eth0 tx off
  Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Arch Linux on RockPro64 mmatyas 30 10,992 05-30-2020, 12:08 PM
Last Post: mmatyas
  RockPro64 Linux Manjaro HDMI 4K mkne 12 313 05-03-2020, 07:23 AM
Last Post: PakoSt
  Mainline U-Boot with Arch Linux PKGBUILD mmatyas 0 92 04-17-2020, 03:49 AM
Last Post: mmatyas
  Slow/dead ethernet on (non-Ayufan) Linux Mainline (fixed) mmatyas 1 139 04-17-2020, 02:53 AM
Last Post: Thra11
  Rockpro64 and stock arch linux TaborFife 6 1,036 01-15-2020, 05:17 PM
Last Post: dragop
  Problem with compiling ayufans linux kernel voegelit 4 346 01-14-2020, 07:38 AM
Last Post: patstew
  Frequent kernel panic, possibly due to PCIe SSD? meier 4 410 11-22-2019, 05:15 PM
Last Post: meier
  Linux Build Help: Stuck at "Starting kernel ..." ihamilton 2 691 10-10-2019, 12:51 PM
Last Post: ihamilton
Information Update 22.02.2019 Feature-complete Debian build - SDIO WiFi/BT / PCIe / 3D / 2D Luke 100 17,940 10-04-2019, 08:57 PM
Last Post: tuxd3v
  Void Linux WIP losinggeneration 0 432 10-04-2019, 03:23 AM
Last Post: losinggeneration

Forum Jump:


Users browsing this thread: 1 Guest(s)