Yep, I got a red indication which turned off after about an hour. I was curious so I removed the back cover and the eMMC chip was not seated. It was partially held in place by the connector but was tilted up on one side. I reseated it and tried the power button again, still no luck. I'll have to look a bit closer at the rest of the connectors.
Success! I reseated the eMMC again with a bit more force and this time there was a more positive click. I then hit the reset button on the board and the laptop booted up.
Success! I reseated the eMMC again with a bit more force and this time there was a more positive click. I then hit the reset button on the board and the laptop booted up.