What's the difference between board v2.2 and v2.3?
#1
Hi,
I got my new boards recently.
But I found the new one comes with v2.3
Just want to know what's the difference between v2.2 and v2.3?
Also, I found something interesting, when plugging the DC power,

my v2.3 board cannot boot all sopine module at the same time.
(Need try 2 ~ 3 times to bring all of them)

usually, 1 or 2 of them will stay off. (I use 50W DC power)

But v2.2 doesn't have such an issue. Any ideas?

Thx!
#2
(06-23-2019, 11:11 PM)kazami2003 Wrote: Just want to know what's the difference between v2.2 and v2.3?

Sorry, no idea... I'll see if I can get an update for that... if there was any changes to the schematics that at least needs to be put up.

(06-23-2019, 11:11 PM)kazami2003 Wrote: my v2.3 board cannot boot all sopine module at the same time.
(Need try 2 ~ 3 times to bring all of them)

I don't seem to be suffering from that behaviour, but mine is a 2.2 also, running from the 5V dc terminals, with one of these 150W 24V -> 5v DC-DC step down modules (as I have 24V power running which it can tap into)... https://www.ebay.com.au/itm/DC-Voltage-R...2551055953

How do you determine they are not working? As I do notice occasionally the ethernet seems to drop out, or not work from boot, but the boards still boot up (I have a shell script that does a heartbeat flash on the GPIO led for the module once it boots, so even if it doesn't want to respond via ethernet I know it's actually up and running).
#3
Hi,

While I have problems on my own with the board, I noticed something in your post:


Quote:(I use 50W DC power)


I believe the recommended PSU from the Pine64 store is 5v 15A which makes it 75w.
Are you confident all modules receive sufficient power?


Possibly Related Threads…
Thread Author Replies Views Last Post
  Is my wooden desk a safe surface to test the cluster board on? ollehar 6 8,425 12-28-2020, 09:41 AM
Last Post: robocone
  Compatibility between RPi Module and Cluster board leperotero 1 3,301 11-03-2020, 03:40 PM
Last Post: poVoq
  What kind of box would be able to host both the cluster board and a RockPro64? ollehar 1 3,517 06-14-2020, 05:37 PM
Last Post: tllim
  Just got my board ... Bazmundi 5 6,804 06-08-2020, 11:32 AM
Last Post: poVoq

Forum Jump:


Users browsing this thread: 1 Guest(s)